V2-EVAL FTDI, Future Technology Devices International Ltd, V2-EVAL Datasheet - Page 14

• Manufacturer Part Number: V2-EVAL
• Description: BOARD DEV FOR VINCULUM-II VNC2
• Manufacturer: FTDI, Future Technology Devices International Ltd
• Series: Vinculum-IIr

Specifications of V2-EVAL

• Main Purpose: USB Controller
• Embedded: Yes, ASIC
• Utilized Ic / Part: VNC2-32Q
• Primary Attributes: 1 type-B and 2 type-A USB connectors
• Secondary Attributes: User Configurable LEDs
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 768-1062

Document Reference No.: FT_000247
V2-EVAL Vinculum II Evaluation Board Datasheet Version 2.0
Clearance No.: FTDI#148
5 Detailed Description of Board Components.
5.1
Power Select Jumper JP6.
Figure 5.1
Power Select Jumper Configuration for USB Power
V2-Eval Board can draw its power either from the external 5V/1A DC Power Supply or from the USB
interface when connected to a USB host via the B type connector (CN13). To enable USB power supply
feature, switch the jumper JP6 to USB position, pins 1&2 shorted (pin 1 has a rectangle shaped pad on
the bottom side of the board).
Warning!
Please remember that every device connected to the PC through USB port can draw NO MORE
than 500mA from the USB host PC 5V power bus.
Copyright © 2010 Future Technology Devices International Limited
13