STEPPER-MTR-RD Silicon Laboratories Inc, STEPPER-MTR-RD Datasheet - Page 6

• Manufacturer Part Number: STEPPER-MTR-RD
• Description: REFERENCE DESIGN STEPPER MOTOR
• Manufacturer: Silicon Laboratories Inc

Specifications of STEPPER-MTR-RD

• Main Purpose: Power Management, Motor Control
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: C8051F301
• Primary Attributes: Unipolar Stepper Motors
• Secondary Attributes: Graphical User Interface
• Processor To Be Evaluated: C8051F301
• Interface Type: RS-232, USB
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 336-1319

STEPPER-MOTOR-RD
6. Development Setup using the USB Debug Adapter
The Stepper Motor Reference Design includes everything you need to develop your own stepper motor control
firmware using the Silicon Laboratories C8051F300/1 MCU. The Stepper Motor reference design code may be
used as a starting point for your own code development.
Connect the Stepper Motor, ac/dc power adapter, and serial cable if you have not done so already. Refer to the
stepper motor wiring Table 1 on page 2 for the stepper motor connections. Connect the USB Debug Adapter ribbon
cable to the 10-pin Debug connector on the Stepper Motor Reference Design Board. Connect the USB Debug
Adapter to your PC using the supplied USB cable as shown in Figure 7.
6
USB Port
PC
Figure 7. Development Setup using the USB Debug Adapter
Cable
USB
Serial Cable
Adapter
Debug
USB
Ribbon
Cable
Rev. 0.1
J3
J1
Reference Design
Stepper Motor
Board
P1
Adapter
AC/DC
Stepper
Motor