PCA7302E1F-80 Renesas Electronics America, PCA7302E1F-80 Datasheet - Page 11

• Manufacturer Part Number: PCA7302E1F-80
• Description: PGM ADPTR FOR 80-PIN 0.8MM QFP M
• Manufacturer: Renesas Electronics America

Specifications of PCA7302E1F-80

• Module/board Type: Programming Adapter
• For Use With/related Products: M16C/20
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

4.2 Attaching Adapter to PROM Programmer
4.3 Setting Switches
As shown Figure 4.1, attach the pin No. 1 of the PCA7402E connector (standard-pitch 32-pin pin-
header mounted) to the pin No. 1 of the IC socket of the PROM programmer.
Figure 4.1 Attaching adapter to PROM programmer
The setting of JP1 switch is prepared for MCUs with their ROM area expanded in the future. Use this
setting for the current MCUs. Figure 4.2 shows the factory-setting of JP1 switch.
Figure 4.2 JP1 switch setting
Note:
(1) Be sure to set the switch properly. Otherwise wrong settings can cause fatal damage to the MCU.
(2) Figure 4.2 applies to both PCA7302E1F-80 and PCA7302E1L-80.
Be careful when attaching the adapter because incorrect insertion can cause fatal
damage to the MCU.
: Position of DIC connector
( 9 / 16 )