CX1033 Xeltek, CX1033 Datasheet - Page 37

• Manufacturer Part Number: CX1033
• Description: SOCKET ADAPTER 28SOIC SUPERPRO5K
• Manufacturer: Xeltek

Specifications of CX1033

• Module/board Type: Socket Module - SOIC
• Positions/sockets: 28
• Rohs Compliant: YES
• For Use With/related Products: SuperPro 5000
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 415-1044

Chip Insertion – None‐DIP Encapsulation
Socket adapters are available for other encapsulations, including PLCC, QFP, and
SOIC. Refer to the Adapter Information on the Device Information screen. The
insertion follows the position of pin 1.
To identify pin 1 of the chip, look for a solid square or dot on the chip that gives
the information about the chip. It also indicates the first pin of the chip.
Direct‐connect
For 144‐pins adapters, connect directly to programmers.
Indirect‐connect
For 48‐pins adapters, insert into DIP of the programmer.
Device Configuration Word
Some single‐chip microcomputers allow special working modes, such as the
storage area mapping, the watchdog time, the clock, or the encryption. Set these
special modes through the Device Configuration Word option.
The user files contain the configuration words of some devices. When you load
these files, the system automatically loads the configuration words into the
configuration word buffer. However, you must select the configuration words for
some devices manually.
Select Device Configuration Word from the Device menu to open the
ConfigWord dialog box. The following sample illustration shows the
Superpro
Note: 1. Generally, the pins of the chip are downward when they are inserted.
Important: The device configuration word varies from device to device. Refer to
However, as for the chip PLCC20, its pins should be upward.. This
insertion is called the ‚Dead Bug‛ method.
2. SUPERPRO/5000 and SUPERPRO/5000E support 144 pins while
SUPERPRO/501S and SUPERPRO/500P only support 48 pins.
®
5000 User’s Guide
the device data manual for more information about the configuration
words. Set the configuration words according to the requirements of
your target system. Otherwise, you cannot use the device normally
even if it is normal when preparing and verifying the program.
:
37