HS2633ECN61H Renesas Electronics America, HS2633ECN61H Datasheet - Page 20

• Manufacturer Part Number: HS2633ECN61H
• Description: DEV EMULATOR PCB ADAPTOR
• Manufacturer: Renesas Electronics America

Specifications of HS2633ECN61H

• Accessory Type: User Interface Cable
• For Use With/related Products: H8S/2633 128-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

1. When using the E6000 emulator for the H8S/2633 series, turn on the emulator according to the
2. Verify the user system interface cable connections by accessing the external memory and ports
3. The emulator connected to this user system interface cable supports two kinds of clock sources
14
EXTAL
R1 1 M
HCU04
procedures described in the H8S Series E6000 Emulator User's Manual.
to check the bus states of the pins with the MEMORY_FILL command (emulator command). If
an error is detected, recheck the soldered IC socket and the location of pin 1.
as the MCU clock: an emulator internal clock and an external clock on the user system. For
details, refer to the H8S/2633 series E6000 Emulator Supplementary Information
(HS2633EPI61HE).
 To use the emulator internal clock
 To use the external clock on the user system
Select the clock in the emulator station as the system clock (φ), by using the CLOCK
command (emulator command).
Supply the external clock from the user system to the emulator. Connect a crystal oscillator
to the EXTAL and XTAL terminals for the system clock (φ), and to the OSC1 and OSC2
terminals for the subclock. The user system interface cable has the oscillator circuits shown
in figure 9. For details, refer to section 23, Clock Pulse Generator, in the H8S/2633 Series
Hardware Manual.
XTAL
R2 270
HCU04
HCU04
Section 4 Verifying Operation
To E6000 emulator
Figure 9 Clock Oscillator Circuits