HS2140EIO61H Renesas Electronics America, HS2140EIO61H Datasheet - Page 26

• Manufacturer Part Number: HS2140EIO61H
• Description: ACCESSORY H8S/2140
• Manufacturer: Renesas Electronics America

Specifications of HS2140EIO61H

• Accessory Type: Expansion I/O Board
• For Use With/related Products: H8S/2140
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

1. Do not place heavy objects on the expansion I/O board.
2. Power is supplied from the emulator station to the expansion I/O board.
3. LPC Module and Ports C to G Reset Specifications
E6000 expansion I/O
board
Target MCU
Note:
RESET MASK check box in Configuration window of HDI. But reset signal for the LPC module
are always enabled when RESET MASK in Configuration of the HDI is either enabled or
disabled. When user debugs target system with the expansion I/O board, disable RESET MASK
and always input RESET signal from the target system.
For the reset function of the LPC module note that there are differences between the
H8S/2140B series E6000 expansion I/O board and the target MCU. The reset conditions for
the CPU and other modules than the LPC have no differences.
Observe the precautions listed below. Failure to do so will
result in a FIRE HAZARD and will damage the user system
and the emulator product or will result in PERSONAL
INJURY. The USER PROGRAM will be LOST.
1. This expansion I/O board is specifically designed for the
2. Use the H8S/2148, 2140B series user system interface
Reset Type
RESET signal from the target board to the evaluation chip can be masked by setting
HS2140EPI61H. Do not use this expansion I/O board
with any other emulator station.
cable (HS2148ECH61H for FP-100B or TFP-100B).
Do notuse any other series of user system interface
cable.
Reset enabled
Reset enabled
Internal Reset by
WDT Overflow
Section 4 Notice
WARNING
Reset disabled
—
RESET Commands
Go RESET, CPU
Reset enabled*
Reset enabled
Reset Signal Input of
Target System
11