CY3655-PLG Cypress Semiconductor Corp, CY3655-PLG Datasheet - Page 14

• Manufacturer Part Number: CY3655-PLG
• Description: ADAPTER PROG USB
• Manufacturer: Cypress Semiconductor Corp

Specifications of CY3655-PLG

• Accessory Type: Programming Adapter
• Product: Interface Modules
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: ICE-CUBE
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Other Kit Hardware
Overview
This section describes the rest of the hardware components that are part of the Cypress
enCoRe II DVK.
5-Pin to USB Adapter
The 5-Pin to USB adapter is a small board that allows enCoRe II based devices to be
programmed through their USB cables using the MiniProg (sold separately). This adapter is
not designed to be used with the ICE-Cube and ISSP cable due to cable length restrictions
during programming. The steps below describe the programming procedure using the
MiniProg.
1. Using a USB cable, plug the MiniProg programmer into a PC that has the PSoC
2. Connect the 5-pin to USB adapter to the MiniProg programmer. It will only attach in one
3. Connect the USB end of the 5-pin to USB adapter to the USB cable of a device that
4. Launch the PSoC Programmer application.
5. In the programming application, select the Port as the MiniProg. After selecting the
6. First select the appropriate device family then select the device to be programmed.
7. Load the programming file using the “File Load” button.
8. Program.
Programmer application installed.
orientation.
uses enCoRe II. Note that the USB device must have a cable no longer than 1 meter.
Typical target devices are mice and keyboards.
MiniProg, make sure that in the “Results” column of the window that an unexpected
firmware version was not found. If necessary, update the MiniProg’s firmware by
choosing “Upgrade Firmware” in the “Utilities” menu.
Page 14 of 16
CY3655 Hardware User Guide