HW-USB-II-G Xilinx Inc, HW-USB-II-G Datasheet - Page 6

• Manufacturer Part Number: HW-USB-II-G
• Description: PLATFORM CABLE USB II
• Manufacturer: Xilinx Inc

Specifications of HW-USB-II-G

• Accessory Type: USB Platform Cable
• For Use With/related Products: Xilinx FPGA, CPLDS, Platform Flash PROMs, XC18V00 PROMs, System ACE MPM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 122-1572

Platform Cable USB II
X-Ref Target - Figure 4
DS593_04_021408
Figure 4: iMPACT (9.2i) Output Pull-Down Menu
Option 2: Manual Cable Connect
To manually connect the cable, select Output → Cable Setup. Select the Xilinx USB Cable radio button in the Cable
Communication Setup dialog box
(Figure
5).
X-Ref Target - Figure 5
DS593_05_021408
Figure 5: iMPACT (10.1) Cable Communication Setup
It is necessary to perform a cable disconnect when switching from Boundary Scan or Direct SPI Configuration mode to
Slave-Serial mode, or vice versa. iMPACT can be disconnected from the cable using Output → Cable Disconnect
6). After the mode switch is complete, reestablish the cable connection using the Output → Cable Setup
(Figure 4, page
dialog. It is not necessary, however, to perform a cable disconnect when switching between Boundary-Scan and Direct SPI
Configuration modes.
DS593 (v1.2.1) March 17, 2011
www.xilinx.com
6