750-00004 Parallax Inc, 750-00004 Datasheet - Page 3

• Manufacturer Part Number: 750-00004
• Description: POWER SUPPLY 24VDC 600MA
• Manufacturer: Parallax Inc

Specifications of 750-00004

• Form: Wall Mount (2 Prong)
• Voltage - Output Per Connector: 24VDC
• Current - Output: 600mA
• Polarization: Positive Center
• Cord Plug: 2.1mm I.D. x 5.5mm O.D. x 12mm Female
• Voltage - Input: 120VAC
• Power - Output: 14W
• Transformer Type: Linear, Unregulated
• Product: Microcontroller Accessories
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Efficiency: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant

Installing the BASIC Stamp
Once the cover is removed, install the BASIC Stamp Module (sold separately) into the 24-pin IC socket
provided observing the proper orientation. Be sure to get each pin into its respective socket and to not
bend pins over. Please refer to Figure 2 ensure you have installed the BASIC Stamp correctly.
Installing the MAX1270 A/D Converter Chip
If you have purchased the optional MAX1270 A/D Converter, now is the best time to install it. Locate the
28-pin IC socket provide and install the MAX1270 observing the proper orientation. Please refer to the
photo on the right to ensure you have installed the MAX1270 correctly.
Figure 3: Installing the Max1270 A/D
Once the BASIC Stamp IC and the optional A/D converter are properly installed re-assemble the
enclosure. Be sure that the spring, red latch, and the front cover are properly aligned prior to snapping
the two halves of the enclosure together.
Installing the 4-20mA Shunts
3
Parallax, Inc. • Stamp PLC (#30064) • Version 1.8 • 12/29/2003
Page