GPC130CG SL Power Electronics Manufacture of Condor/Ault Brands, GPC130CG Datasheet
![no-image](/images/no-image-200.jpg)
GPC130CG
Manufacturer Part Number
GPC130CG
Description
POWER SUPPLY SWITCHER 130W QUAD
Manufacturer
SL Power Electronics Manufacture of Condor/Ault Brands
Series
GPC130r
Datasheet
1.GPC130A.pdf
(2 pages)
Specifications of GPC130CG
Voltage - Output
5V, 12V, ±15V
Number Of Outputs
4
Power (watts)
130W
Applications
Commercial
Power Supply Type
Switching (Open Frame)
Voltage - Input
85 ~ 264VAC
Mounting Type
Chassis Mount
1st Output
5 VDC @ 16A
2nd Output
12 VDC @ 5A
3rd Output
-15 VDC @ 1.2A
4th Output
15 VDC @ 1.2A
Size / Dimension
8.5" L x 4.5" W x 2" H (215.9mm x 114.3mm x 50.8mm)
Power (watts) - Rated
130W
Operating Temperature
0°C ~ 50°C
Efficiency
70%
Approvals
CE, CSA, IEC, UL
Line Regulation
2%, 3%
Load Regulation
2%, 3%
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
54
SPECIFICATIONS:
Ac Input
85-264 Vac, 47-63 Hz single phase.
Input Current
Maximum input current at 120 Vac, 60 Hz with full rated output
load: 3.5 A
Hold-Up Time
20 ms minimum from loss of ac input at full load, nominal line
(115 Vac).
Output Power
100 W continuous, 165 W peak; 130 W with 26 cfm air flow. Peak
ratings are for 60 s maximum duration, 10% duty cycle. During
peak load condition, output regulation may exceed total
regulation limits.
Overload Protection
Fully protected against short circuit and output overload. Short
circuit protection is cycling type power limit on outputs 1 & 2;
foldback type on outputs 3 & 4. Recovery after fault is automatic.
See output ratings chart for additional notes or conditions.
Overvoltage Protection
Main outputs: 124% ± 12% typical.
Efficiency
70% at full rated load, nominal input voltage, depending on model
and load distribution.
Turn-on Time
Less than 1 second at 120 Vac, 25°C (inversely proportional to
input voltage and thermistor temperature).
Input Protection
Internal ac fuse provided. Designed to blow only if a catastrophic
failure occurs in the unit.
Inrush Current
Inrush is limited by internal thermistors. Inrush at 240 Vac under
cold start conditions will not exceed 34 A.
Temperature Coefficient
0.03%/
Thermal Shutdown
Provided as a standard feature. Designed to protect unit from
prolonged overtemperature.
Environmental
Designed for 0 to 50°C operation at full rated output power;
derate output current and total output power by 2.5% per °C
above 50°C. See Environmental and Packaging Specifications
on next page.
GPC130
130 Watt Global Performance Switchers
°
C typical on all outputs.
Commercial/GPM130 Medical
Condor D.C. Power Supplies, Inc., 2311 Statham Parkway, Oxnard, CA 93033
800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com
Power Fail
TTL- or CMOS-compatible output goes low (< 0.5V) 5 ms
before output voltage drops more than 4% below nominal
voltage upon loss of ac power. The signal is factory set to
trip on 84 to 94Vac brown-out depending upon incoming line
impedance and distortion. Other settings are available to the
user through adjustment of built-in potentiometer.
Output Noise
0.5% rms, 1% pk-pk, 20 MHz bandwidth, differential mode.
Measured with noise probe directly across output terminals of
the power supply.
Transient Response
Main output—500µSec typical response time for return to within
0.5% of final value for a 50% load step change. i/ t<0.2 A/µs.
Maximum voltage deviation is 3.5%. Startup/shutdown overshoot
less than 3%.
Remote Sense
Provided as a standard feature on output 1.
Voltage Adjustment
Built-in potentiometer adjusts voltage ±5% on outputs 1 & 2.
Overload Protection
Factory set to begin power limiting at approximately 170 W.
EMI/EMC Compliance
All models include built-in EMI filtering to meet the following
emissions requirements:
EMI SPECIFICATIONS
Conducted Emissions GPC130 EN55022 Class B; FCC Class B
Conducted Emissions GPM130 EN55022 Class B; FCC Class B
Static Discharge
RF Field Susceptibility
Fast Transients/Bursts
Surge Susceptibility
Commercial Leakage Current
0.7 mA 254 Vac @ 60 Hz input.
Commercial Safety
Approved to UL1950, CSA22.2 No. 234 Level 3, IEC950 and
EN60950. UL file #E135803 commercial; CSA #LR46516 all
models. The output(s) are intended for safety earthed Signal
Output and Intermediate Circuits only. All dc outputs are SELV
under normal and single fault conditions.
Medical Leakage Current
35 µA 254 Vac @ 60 Hz input.
Medical Safety
Approved to UL2601, CSA22.2 No. 601 Level 3 and IEC601. UL
file E116994; CSA #LR46516. The output(s) are intended for
safety earthed Signal Output and Intermediate Circuits only. The
output(s) are not acceptable for patient connection without
additional isolation. All dc outputs are SELV under normal and
single fault conditions.
FEATURES:
• Wide-range ac input 85-264 Vac
• 2-year warranty
• Commercial Approved to UL1950, IEC950,
• Medical Approved to UL2601-1, IEC601-1 and
• Conducted EMI exceeds FCC Class B and CISPR 22
•
EN60950 and CSA22.2-234 L3
CSA22.2 No. 601
Class B (Commercial models) and CISPR 11 Class B
(Medical models)
marked to LVD
EN61000-4-5, 1 kV diff., 2 kV com.
EN61000-4-2, 6 kV contact, 8 kV air
COMPLIANCE LEVEL
EN61000-4-4, 2 kV, 5 kHz
EN61000-4-3, 3 V/meter
Related parts for GPC130CG
GPC130CG Summary of contents
Page 1
GPC130 Commercial/GPM130 Medical 130 Watt Global Performance Switchers SPECIFICATIONS: Ac Input 85-264 Vac, 47-63 Hz single phase. Input Current Maximum input current at 120 Vac with full rated output load: 3.5 A Hold-Up Time 20 ms minimum from ...
Page 2
GPC130 Commercial/GPM130 Medical ...