SWS1000L-3 TDK Corporation, SWS1000L-3 Datasheet - Page 11

• Manufacturer Part Number: SWS1000L-3
• Description: PWR SUP MED 3.3V 200A SGL OUTPUT
• Manufacturer: TDK Corporation
• Series: SWS1000Lr

Specifications of SWS1000L-3

• Power Supply Type: Switching (Closed Frame)
• Voltage - Output: 3.3V
• Number Of Outputs: 1
• Power (watts): 1000W
• Applications: Medical
• Voltage - Input: 85 ~ 265VAC
• Mounting Type: Chassis Mount
• 1st Output: 3.3 VDC @ 200A
• Size / Dimension: 9.45" L x 5.91" W x 2.4" H (240mm x 150mm x 61mm)
• Power (watts) - Rated: 660W
• Operating Temperature: -20°C ~ 74°C
• Efficiency: 77%
• Approvals: CSA, DENAN, EN, IEC, UL
• Power Supply Output Type: Fixed
• No. Of Outputs: 1
• Output Voltage: 3.3V
• Output Current: 200A
• Power Rating: 660W
• Input Voltage: 85V AC To 265V AC / 120V DC To 350V DC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 285-1796; SWS1000L3

・All specifications are subject to change without notice.
SWS
Please pay extra attention to the wiring. Incorrect connec-
tion will damage the power supply.
● When connecting input, output wiring and CN1, CN2,
● Input wiring and output wiring shall be separated to im-
● The protective earth (PE) must be connected to the
● Remote sensing lines shall be twisted or used shielded wires.
● Remote ON/OFF control lines shall be twisted or used
● Output current of each terminal screw shall be 60A or
Panel Side
● Basic connection (Local sensing)
SWS600L
SWS1000L
● Remote sensing required
SWS600L
CN3, input AC-Line should be off .
prove noise sensibility.
minal or chassis.
shielded wires. Separate from load line.
less for SWS600L.
Connect “+S” terminal to “+Vm” terminal and “-S” terminal to
“-Vm” terminal.
Connect “+S” terminal to “+” terminal of load and “-S” termi-
nal to “-” output terminal of load with wires.
600L, 1000L
A
B
3. Terminal Connection Method
CN1(or CN2)
CN1(or CN2)
CN1(or CN2)
twist or shield
A
B
ter-
SWS1000L
● ALM signal output required
SWS600L
SWS1000L
Open collector method shown below shall be used.
“G1” terminal is ground for “ALM” terminal.
A
B
CN3
CN1(or CN2)
CN3
ALM
signal
output
signal
ground
ALM
signal
output
signal
ground
twist or shield
A
B
CN1(or CN2)
CN1(or CN2)
11