LS50-5 TDK Corporation, LS50-5 Datasheet - Page 13

• Manufacturer Part Number: LS50-5
• Description: POWER SUPPLY 5V 10A SGL OUTPUT
• Manufacturer: TDK Corporation
• Series: LSr
• Type: Industrialr

Specifications of LS50-5

• Voltage - Output: 5V
• Number Of Outputs: 1
• Power (watts): 50W
• Applications: Commercial
• Power Supply Type: Switching (Closed Frame)
• Voltage - Input: 88 ~ 264VAC
• Mounting Type: Chassis Mount
• 1st Output: 5 VDC @ 10A
• Size / Dimension: 3.9" L x 3.8" W x 1.4" H (99.1mm x 96.5mm x 35.6mm)
• Power (watts) - Rated: 50W
• Operating Temperature: -25°C ~ 70°C
• Efficiency: 80%
• Approvals: CE, EN, IEC, UL
• Brand/series: LS Series
• Configuration: Enclosed
• Current, Output: 10.0
• Frequency, Input: 47-63 Hz
• Height: 1.4 Inch
• Length: 3.9 Inch
• Line Regulation: 20 mV
• Load Regulation: 40 mV
• Operation: Switching
• Output: 5 VDC @ 10 A
• Power Rating: 50 Watts
• Power, Output: 50 W
• Primary Type: AC-DC
• Ripple, Rejection: 80 mV
• Temperature, Operating: –25 to 70 degree C
• Temperature, Storage: –40 to 85 degree C
• Voltage, Adjustment Range: 4.75-5.50
• Voltage, Input: 88 to 264/125 to 373 VAC/VDC
• Voltage, Output: 5 VDC
• Weight: 12.5 Ozs.
• Width: 3.8 Inch
• Output Current (max): 10A
• Output Voltage: 5V
• Input Frequency: 47 to 63Hz
• Screening Level: Commercial
• Operating Temperature Min Deg. C: -25C
• Operating Temperature Max Deg. C: 70C
• Mounting Style: Chassis
• Pin Count: 5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / Rohs Status: RoHS Compliant part
• Other names: 285-1824; LS505

7. External Fuse Rating
8. Before concluding that the unit is at fault, make the following checks.
MODEL
LS25
LS35~LS50
LS75~LS150
NOTE : It is normal to hear audible noise from power-supply under Dynamic Load operation or if the input voltage
waveform is not sinusoidal.
9. Warranty Condition
Warranty applies but not limited to the following.
Following cases are not covered by warranty.
Refer to the following fuse rating when selecting the external input fuse. Surge current flows when input turns on.
Fuse rating is specified by Inrush Current value at input turn on. Do not select the fuse according to input current (rms)
values under the actual load condition.
This product is under warranty for 3 years (based on 8 hours/day operation) from the date of shipment. During the
warranty period, TDK-Lambda will, at it’s option, either repair or replace products prove to be defective.
Check if the rated input voltage is connected.
Check if the wiring of input and output is correct.
Check if the wire size is correct.
Check if the output voltage trimmer (V.ADJ) is properly adjusted.
Check if the output current and output wattage does not exceed the specification.
Ensure that a large capacitor is not connected across the output terminals. Please use within maximum capacitance
shown below.
LS25
LS35, LS50
LS75
LS100
LS150
(1) Average operating temperature (ambient temperature of the power supply unit) is under 40
(2) Average load factor is 80% or less.
(3) Installation method : Standard installation.
(1) Improper usage and mis-handling like dropping or applying shock to the unit and defects from operation
(2) Defects resulting from natural disaster (fire, flood).
(3) Unauthorized modification or repair.
exceeding specification of the product.
3.3V
:
:
:
:
:
10,000uF
10,000uF
F1.6A , 250V
T2A , 250V
T2.5A , 250V
F4A , 250V
F5A , 250V
5V
10,000uF
5,000uF
12V
Maximum external capacitance
5,000uF
12
2,000uF
15V
1,000uF
2,000uF
5,000uF
24V
LS
INSTRUCTION MANUAL
TDK-Lambda
25-150
36V
o
1,000uF
Series
C.
500uF
500uF
48V