LSN2-T/30-D12-C Murata Power Solutions Inc, LSN2-T/30-D12-C Datasheet - Page 2

• Manufacturer Part Number: LSN2-T/30-D12-C
• Description: CONV DC/DC 150W 30A 0.8-5V SIP
• Manufacturer: Murata Power Solutions Inc
• Series: LSN2r
• Type: Point of Load (POL) Non-Isolatedr

Specifications of LSN2-T/30-D12-C

• Number Of Outputs: 1
• Output: 0.8 ~ 5V
• Power (watts): 150W
• Mounting Type: Through Hole
• Voltage - Input: 6 ~ 14V
• Package / Case: 13-SIP Module
• 1st Output: 0.8 ~ 5 VDC @ 30A
• Size / Dimension: 2.00" L x 0.45" W x 0.50" H (50.8mm x 11.4mm x 12.7mm)
• Power (watts) - Rated: 150W
• Operating Temperature: -40°C ~ 85°C
• Efficiency: 94%
• Approvals: CSA, EN, UL
• Output Power: 150 W
• Input Voltage Range: 6 V to 14 V
• Input Voltage (nominal): 12 V
• Output Voltage (channel 1): 0.8 V to 5 V
• Output Current (channel 1): 30 A
• Package / Case Size: SIP
• Output Type: Low Voltage Selectable
• Output Voltage: 0.8 V to 5 V
• Product: Non-Isolated / POL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 811-1806-5

Murata Power Solutions recommends the specifi cations below when installing these converters. These specifi cations vary depending on the solder type.
Exceeding these specifi cations may cause damage to the product. Your production environment may differ therefore please thoroughly review these guidelines
with your process engineers.
Wave Solder Operations for through-hole mounted products (THMT)
For Sn/Ag/Cu based solders:
Maximum Preheat Temperature
Maximum Pot Temperature
Maximum Solder Dwell Time
For Sn/Pb based solders:
Maximum Preheat Temperature
Maximum Pot Temperature
Maximum Solder Dwell Time
SOLDERING GUIDELINES
➀ Typical at T
➁ Ripple/Noise (R/N) is tested/specifi ed over a 20MHz bandwidth for V
PERFORMANCE SPECIFICATIONS AND ORDERING GUIDE ➀
LSN2-T/30-D12-C
PART NUMBER STRUCTURE
models are tested and specifi ed with external 22μF tantalum input and output 0.01//0.1//10μF
capacitors. These capacitors are necessary to accommodate our test equipment and may not
be required to achieve specifi ed performance in your applications. See I/O Filtering and
Noise Reduction.
reduced with external fi ltering. See I/O Filtering and Noise Reduction for details.
Model
Output Confi guration:
A
➆
Non-Isolated Through-hole
= +25°C under nominal line voltage and full-load conditions, unless noted. All
L = Unipolar
Low Voltage
Nominal Output Voltage:
0.8-5 Volts
(Volts)
0.8-5
V
OUT
Maximum Rated Output
Current in Amps
(Amps)
L SN2
I
30
OUT
115ºC.
270ºC.
7 seconds
105ºC.
250ºC.
6 seconds
(Watts)
Power
150
-
T 30
/
Output
OUT
R/N (mVp-p)
Typ.
25
-
> 3.63V and may be
D12
Max.
www.murata-ps.com
50
➁
G
-
Regulation (max.)
C
±0.1%
Power Good:
Line
Input Voltage Range:
RoHS-6 hazardous substance compliant
(does not claim EU RoHS exemption 7b–lead in solder)
Blank = Omitted (default)
G = Installed (special quantity orders required)
D12 = 7-14 Volts (12V nominal)
➂ These devices have no minimum-load requirements and will regulate under no-load conditions.
➃ Nominal line voltage, no-load/full-load conditions.
➄ LSN2-T/30-D12 effi ciencies are shown at 5V
➅ Input range is 6-14V if V
➆ Please refer to the Part Number Structure for additional options when ordering.
±0.1%
Regulation specifi cations describe the output-voltage deviation as the line voltage or load is
varied from its nominal/midpoint value to either extreme.
Load
➂
V
(Volts)
IN
12
Nom.
25 Jun 2010 MDC_LSN2-T/30-D12
LSN2-T/30-D12 Series
OUT
DOSA-SIP, 30A POL DC/DC Converters
Range
(Volts)
≤3.63V. For V
Input
6-14
➅
200/11.1
OUT
(mA/A)
Note:
Some model number combina-
tions may not be available. Contact
Murata Power Solutions.
I
IN
OUT
> 3.63V, the input range is 7–14V.
➃
.
93%
Min.
email: [e-mail]
Effi ciency
Series.B20Δ
94%
Typ.
➄
B13, P71
Page 2 of 16
Package
Pinout)
(Case/