RP15-2415SA/N-HC Recom Power Inc, RP15-2415SA/N-HC Datasheet - Page 3

• Manufacturer Part Number: RP15-2415SA/N-HC
• Description: CONV DC/DC 15W 18-36VIN 15VOUT
• Manufacturer: Recom Power Inc
• Series: Powerline RP15-Ar
• Type: Isolated with Remote On/Offr

Specifications of RP15-2415SA/N-HC

• Output: 15V
• Number Of Outputs: 1
• Power (watts): 15W
• Mounting Type: Through Hole
• Voltage - Input: 18 ~ 36V
• Package / Case: 6-DIP Module (4 Leads)
• 1st Output: 15 VDC @ 1A
• Size / Dimension: 1.00" L x 1.00" W x 0.39" H (25.4mm x 25.4mm x 9.9mm)
• Power (watts) - Rated: 15W
• Operating Temperature: -40°C ~ 85°C
• Efficiency: 88%
• Approvals: cUL, UL
• Product: Isolated
• Output Power: 15 W
• Input Voltage Range: 18 V to 36 V
• Input Voltage (nominal): 24 V
• Output Voltage (channel 1): 15 V
• Isolation Voltage: 1.6 KV
• Package / Case Size: 1 in x 1 in
• Output Voltage: 15 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / Rohs Status: Details
• Other names: 30001460

www.recom-international.com
POWERLINE
DC/DC-Converter
Specifications
Notes :
Operating Frequency
Operating Temperature Range
Maximum Case Temperature
Storage Temperature Range
Thermal Impedance
(see Note 6)
Thermal Shock
Vibration
Relative Humidity
Case Material
Base Material
Potting Material
Conducted Emissions (see Note 7)
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge (see note 8)
Conducted Immunity
Weight
Packing Quantity
Dimensions
MTBF (see Note 9)
1. Values at nominal input voltage and no load/full load.
2. Typical Value at nominal input voltage and full load.
3. Test by minimum Vin and constant resistor load.
4. Simulated source impedance of 12µH. 12µH inductor in series with +Vin.
5. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input.
6. Optional Heat-sink P/N is 7G-0047-C. Powerline DC/DC Converters can be ordered with pre-mounted heatsinks including antivibration fixing clips
7. Meets Class A with external input capacitors shown below. Will meet Class B with external common mode filter (see Application Notes)
8. Requires external capacitor to meet EN61000-4-5: 220µF/100V, low ESR (48mOhm)
9. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C.
Positive logic ON/OFF is marked with suffix-P (eg. RP15-2405SA/P)
Negative logic ON/OFF is marked with suffix-N (eg. RP15-2405SA/N).
If no suffix is specified, the control pin will be omitted.
(add suffix -HC). See Application Notes for heatsink details.
MIL-HDBK 217F Notice 2. Ta = 25°C, full load, (Ground, Benign, controlled environment).
External Output Trimming (optional)
(typical at nominal input and 25°C unless otherwise noted)
With suffix /CTRL, the output can be externally trimmed by
using the method shown here.
See Application Notes for details
REV:1/2010
Natural convection
Natural convection with Heat Sink
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Refer to App Notes for tube dimensions
Bellcore TR-NWT-000332
MIL-HDBK 217F
RP15-S_DA
Series
10-55Hz, 10G, 30 Min. along X, Y and Z
-40°C to +85°C(with derating)
25.4 x 25.4 x 9.9mm
Nickel plated copper
-55°C to +125°C
1330 x 10
Epoxy (UL94-V0)
563 x 10
MIL-STD-810F
5% to 95% RH
8 pcs per Tube
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
18.2°C/Watt
15.8°C/Watt
400kHz typ.
FR4 PCB
+105°C
P-43
Class A
Class A
3
3
hours
hours
15g