LOPL-E001B Lite-On Electronics, LOPL-E001B Datasheet - Page 11
![LED 1W BLUE INGAN SMD](/photos/8/23/82377/lopl-e001b_sml.jpg)
LOPL-E001B
Manufacturer Part Number
LOPL-E001B
Description
LED 1W BLUE INGAN SMD
Manufacturer
Lite-On Electronics
Datasheet
1.LOPL-E001B.pdf
(12 pages)
Specifications of LOPL-E001B
Color
Blue
Current - Test
350mA
Luminous Flux @ Current - Test
12lm
Current - Max
350mA
Lumens @ Current - Max
12lm
Lumens/watt @ Current - Test
9lm/W
Voltage - Forward (vf) Typ
3.8V
Wavelength
465nm
Lens Style/size
Round with Flat Top
Viewing Angle
110°
Mounting Type
Surface Mount
Package / Case
8mm Round
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
160-1775-2
Part No.: LOPL-E001B DATA SHEET
BNC-OD-C131/A4
8.4 ESD (Electrostatic Discharge)
Static Electricity or power surge will damage the LED. Suggestions to prevent ESD damage:
l
l
l
l
ESD-damaged LEDs will exhibit abnormal characteristics such as high reverse leakage current, low
forward voltage, or “no light up” at low currents. To verify for ESD damage, check for “light up” and V
of the suspect LEDs at low currents. The V
product.
8.5 Suggested Checking List
Training and Certification
Static-Safe Workstation & Work Areas
Personnel Grounding
1.
2.
1.
2.
3.
4.
1.
2.
3.
4.
5.
Use a conductive wrist band or anti-electrostatic glove when handling these LEDs.
All devices, equipment, and machinery must be properly grounded.
Work tables, storage racks, etc. should be properly grounded.
Use ion blower to neutralize the static charge which might have built up on surface of the LED’s
plastic lens as a result of friction between LEDs during storage and handling.
Everyone working in a static-safe area is ESD-certified?
Training records kept and re-certification dates monitored?
Static-safe workstation or work-areas have ESD signs?
All surfaces and objects at all static-safe workstation and within 1 ft measure less than 100V?
All ionizer activated, positioned towards the units?
Each work surface mats grounding is good?
Every person (including visitors) handling ESD sensitive (ESDS) items wear wrist strap, heel
strap or conductive shoes with conductive flooring?
If conductive footwear used, conductive flooring also present where operator stand or walk?
Garments, hairs or anything closer than 1 ft to ESD items measure less than 100V?
Every wrist strap or heel strap/conductive shoes checked daily and result recorded for all
DLs?
All wrist strap or heel strap checkers calibration up to date?
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
F
of “good” LEDs should be >2.0V@0.1mA for InGaN
Page:
11
of
12
F