LOPL-E011AA Lite-On Electronics, LOPL-E011AA Datasheet - Page 10
![no-image](/images/manufacturer_photos/0/3/391/lite-on_electronics_sml.jpg)
LOPL-E011AA
Manufacturer Part Number
LOPL-E011AA
Description
LED 1W STAR MCPCB AMBER ALINGAP
Manufacturer
Lite-On Electronics
Datasheet
1.LOPL-E011AA.pdf
(12 pages)
Specifications of LOPL-E011AA
Color
Amber
Current - Test
350mA
Luminous Flux @ Current - Test
28lm
Current - Max
350mA
Lumens @ Current - Max
28lm
Lumens/watt @ Current - Test
31lm/W
Voltage - Forward (vf) Typ
2.57V
Lens Style/size
Round with Domed Top
Viewing Angle
110°
Mounting Type
Surface Mount
Package / Case
8mm Round
Illumination Color
Amber
Wavelength/color Temperature
590 nm
Luminous Flux
38 lm
Power Rating
1.15 W
Operating Voltage
2.57 V
Operating Current
0.35 A
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Wavelength
-
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
160-1744
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
LOPL-E011AA
Manufacturer:
LITEON
Quantity:
40 000
7. Cautions
Part No.: LOPL-E011A DATA SHEET
BNC-OD-C131/A4
7.1 Application
The LEDs described here are intended to be used for ordinary electronic equipment (such as office
equipment, communication equipment and household applications).Consult Liteon’s Sales in advance
for information on applications in which exceptional reliability is required, particularly when the failure
or malfunction of the LEDs may directly jeopardize life or health (such as in aviation, transportation,
traffic control equipment, medical and life support systems and safety devices).
7.2 Storage
The storage ambient for the LEDs should not exceed 30°C temperature or 70% relative humidity.
It is recommended that LEDs out of their original packaging are IR-reflowed within one week.
For extended storage out of their original packaging, it is recommended that the LEDs be stored in a
sealed container with appropriate desiccant, or in a desiccators with nitrogen ambient.
LEDs stored out of their original packaging for more than a week should be baked at about 60 deg C
for at least 24 hours before solder assembly.
7.3 Drive Method
An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs
connected in parallel in an application, it is recommended that a current limiting resistor be
incorporated in the drive circuit, in series with each LED as shown in Circuit A below.
(A) Recommended circuit.
(B) The brightness of each LED might appear different due to the differences in the I-V characteristics
of those LEDs.
Circuit model A
LED
Property of Lite-On Only
Circuit model B
LED
Page:
10
of
12