HSMF-A341-A00J1 Avago Technologies US Inc., HSMF-A341-A00J1 Datasheet - Page 10

• Manufacturer Part Number: HSMF-A341-A00J1
• Description: LED RED/GREEN/BLUE 40MCD 5V SMD
• Manufacturer: Avago Technologies US Inc.

Specifications of HSMF-A341-A00J1

• Package / Case: 4-PLCC
• Viewing Angle: 120°
• Mounting Type: Surface Mount
• Color: Red, Green, Blue (RGB)
• Lens Style/size: Round with Flat Top
• Voltage - Forward (vf) Typ: 1.9V Red, 3.4V Green, 3.4V Blue
• Millicandela Rating: 80mcd Red, 160mcd Green, 40mcd Blue
• Luminous Flux @ Current - Test: 251 mlm Red, 503 mlm Green, 126 mlm Blue
• Current - Test: 20mA
• Lens Type: Clear
• Wavelength - Peak: 635nm, 523nm, 468nm
• Resistance Tolerance: 626nm, 525nm, 470nm
• Led Size: 3.2 mm x 2.8 mm
• Illumination Color: Red, Green, Blue
• Lens Color/style: Diffused
• Operating Voltage: 1.9 V, 3.4 V, 3.4 V
• Wavelength: 626 nm, 525 nm, 470 nm
• Luminous Intensity: 80 mcd, 160 mcd, 40 mcd
• Mounting Style: SMD/SMT
• Operating Current: 20 mA
• Lens Shape: Flat Round
• Maximum Operating Temperature: + 100 C
• Minimum Operating Temperature: - 55 C
• Peak Wavelength: 635 nm, 523 nm, 468 nm
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: Q2039136

Handling Precaution
The encapsulation material of the product is made of
silicone for better reliability of the product. As silicone
is a soft material, please do not press on the silicone or
poke a sharp object onto the silicone. These might dam-
age the product and cause premature failure. During as-
sembly of handling, the unit should be held on the body
only. Please refer to Avago Application Note AN 5288 for
detail information.
Moisture Sensitivity
This product is qualifi ed as Moisture Sensitive Level 2a
per Jedec J-STD-020. Precautions when handling this
moisture sensitive product is important to ensure the
reliability of the product. Do refer to Avago Application
Note AN5305 Handling of Moisture Sensitive Surface
Mount Devices for details.
A. Storage before use
10
- Unopen moisture barrier bag (MBB) can be stored
- It is not recommended to open the MBB prior to
at <40°C/90%RH for 12 months. If the actual shelf
life has exceeded 12 months and the HIC indicates
that baking is not required, then it is safe to refl ow
the LEDs per the original MSL rating.
assembly (e.g. for IQC).
B. Control after opening the MBB
C. Control for unfi nished reel
D. Control of assembled boards
E. Baking is required if:
Recommended baking condition: 60±5°C for 20 hours.
- The humidity indicator card (HIC) shall be read
- The LEDs must be kept at <30°C / 60%RH at all time
- For any unuse LEDs, they need to be stored in sealed
- If the PCB soldered with the LEDs is to be subjected
- “10%” or “15%” HIC indicator turns pink.
- The LEDs are exposed to condition of >30°C / 60%
- The LEDs fl oor life exceeded 672 hours.
immediately upon opening of MBB.
and all high temperature related process including
soldering, curing or rework need to be completed
within 672 hours.
MBB with desiccant or desiccator at <5%RH.
to other high temperature processes, the PCB
need to be stored in sealed MBB with desiccant
or desiccator at <5%RH to ensure no LEDs have
exceeded their fl oor life of 672 hours.
RH at any time.