HSMD-C110 Avago Technologies US Inc., HSMD-C110 Datasheet - Page 12

• Manufacturer Part Number: HSMD-C110
• Description: LED CHIP GAP ORANGE RA MOUNT
• Manufacturer: Avago Technologies US Inc.

Specifications of HSMD-C110

• Viewing Angle: 130°
• Color: Orange
• Millicandela Rating: 8mcd
• Current - Test: 20mA
• Wavelength - Dominant: 604nm
• Wavelength - Peak: 605nm
• Voltage - Forward (vf) Typ: 2.2V
• Lens Type: Clear
• Lens Style/size: Rectangle, 2mm x 1mm
• Package / Case: 1206 (3216 Metric)
• Size / Dimension: 3.20mm L x 1.00mm W
• Height: 1.50mm
• Mounting Type: Surface Mount, Right Angle
• Resistance Tolerance: 604nm
• Led Color: Orange
• Luminous Intensity: 8mcd
• Forward Current If: 20mA
• Forward Voltage: 2.2V
• Led Mounting: SMD
• Lens Shape: Dome
• Wavelength Typ: 604nm
• No. Of Pins: 2
• Opto Case Style: SMD
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Luminous Flux @ Current - Test: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Figure 20. Tape leader and trailer dimensions.
Notes:
1. All dimensions in millimeters (inches).
2. Tolerance is ±0.1 mm (±0.004 in.)unless otherwise specified.
For product information and a complete list of distributors, please go to our website:
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2010 Avago Technologies. All rights reserved. Obsoletes 5989-4806EN
AV02-0551EN - May 10, 2010
END
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
MOUNTED WITH
COMPONENTS
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
START
www.avagotech.com
MINIMUM OF
230 mm
(9.05 INCH)
MAY CONSIST
OF CARRIER
AND/OR
COVER TAPE.
Storage Condition: 5 to 30˚ C
@ 60% RH max.
Baking is required under the
condition:
Baking recommended condition: 60
+/– 5˚C for 20 hours.
Convective IR Reflow Soldering
For more information on IR reflow
soldering, refer to Application Note
1060, Surface Mounting SMT LED
Indicator Components.
a) Humidity Indicator Card is
b) Device exposed to factory
>10% when read at 23 ± 5°C.
conditions <30°C/60% RH
more than 672 hours.