LTL2R3SYK Lite-On Electronics, LTL2R3SYK Datasheet - Page 9

• Manufacturer Part Number: LTL2R3SYK
• Description: LED 5MM 594NM ALINGAP AMBER CLR
• Manufacturer: Lite-On Electronics

Specifications of LTL2R3SYK

• Viewing Angle: 30°
• Package / Case: Radial - 2 Lead
• Color: Amber
• Millicandela Rating: 2800mcd
• Current - Test: 20mA
• Wavelength - Dominant: 590nm
• Wavelength - Peak: 591nm
• Voltage - Forward (vf) Typ: 2.35V
• Lens Type: Clear
• Lens Style/size: Round, 5mm, T-1 3/4
• Height: 8.70mm
• Mounting Type: Through Hole
• Resistance Tolerance: 590nm
• Led Size: T-1 3/4
• Illumination Color: Amber
• Lens Color/style: Water Clear
• Operating Voltage: 2.35 V
• Wavelength: 590 nm
• Luminous Intensity: 2800 mcd
• Operating Current: 20 mA
• Lens Dimensions: 5 mm
• Lens Shape: Dome
• Maximum Operating Temperature: + 80 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: Through Hole
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Luminous Flux @ Current - Test: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 160-1657

6. Drive Method
7. ESD (Electrostatic Discharge)
Part No. : LTL2P3SEK / LTL2R3SEK / LTL2P3SYK / LTL2R3SYK
BNS-OD-C131/A4
Suggestions to prevent ESD damage:
Static Electricity or power surge will damage the LED.
connected in parallel in an application, it is recommended that a current limiting resistor be incorporated
in the drive circuit, in series with each LED as shown in Circuit A below.
An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs
(B) The brightness of each LED might appear different due to the differences in the I-V characteristics
(A) Recommended circuit
Use a conductive wrist band or anti- electrostatic glove when handling these LEDs
All devices, equipment, and machinery must be properly grounded
Work tables, storage racks, etc. should be properly grounded
plastic lens as a result of friction between LEDs during storage and handing
Use ion blower to neutralize the static charge which might have built up on surface of the LEDs
of those LEDs
Circuit model A
LED
LITE-ON TECHNOLOGY CORPORATION
P r o p e r t y o f L i t e - O n O n l y
Circuit model B
Page :
LED
9
of
11