LTST-C230KSKT Lite-On Electronics, LTST-C230KSKT Datasheet - Page 9

• Manufacturer Part Number: LTST-C230KSKT
• Description: LED YELLOW CLEAR 1206 REV MT SMD
• Manufacturer: Lite-On Electronics
• Type: Uni-Colorr

Specifications of LTST-C230KSKT

• Led Size: 1206
• Illumination Color: Yellow
• Lens Color/style: Water Clear
• Operating Voltage: 2 V
• Wavelength: 587 nm
• Luminous Intensity: 60 mcd
• Mounting Style: SMD/SMT
• Operating Current: 20 mA
• Lens Shape: Rectangular
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 55 C
• Peak Wavelength: 588 nm
• Package / Case: 1206 (3216 Metric)
• Viewing Angle: 130°
• Color: Yellow
• Millicandela Rating: 60mcd
• Current - Test: 20mA
• Wavelength - Dominant: 587nm
• Wavelength - Peak: 588nm
• Voltage - Forward (vf) Typ: 2V
• Lens Type: Clear
• Lens Style/size: Rectangle, 1.6mm x 1.5mm
• Size / Dimension: 3.20mm L x 1.60mm W
• Height: 1.10mm
• Mounting Type: Surface Mount, Bottom Entry
• Resistance Tolerance: 587nm
• Package Type: Chip Led
• Emitting Color: Amber
• Test Current (it): 20mA
• Forward Current: 30mA
• Dominant Wave Length: 587nm
• Forward Voltage: 2.4V
• Product Length (mm): 3.2mm
• Product Height (mm): 1.1mm
• Product Depth (mm): 1.6mm
• Mounting: Surface Mount
• Shape Type: Rectangular
• Chip Material: AlGaInP
• Main Category: Chip LED
• Number Of Elements: 1
• Pin Count: 2
• Operating Temperature Classification: Industrial
• Operating Temp Range: -55C to 85C
• Reverse Voltage: 5V
• Power Dissipation: 75mW
• Lens Dimensions: 1.5X1.6X0.82mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Luminous Flux @ Current - Test: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 160-1458-2; LTSTC230KSKT

BNS-OD-C131/A4
Part No. : LTST-C230KSKT
1. Application
2. Storage
3. Cleaning
4. Soldering
5. Drive Method
6. ESD (Electrostatic Discharge)
Static Electricity or power surge will damage the LED.
Suggestions to prevent ESD damage:
The LEDs described here are intended to be used for ordinary electronic equipment (such as office
equipment, communication equipment and household applications).Consult Liteon’s Sales in advance
for information on applications in which exceptional reliability is required, particularly when the failure
or malfunction of the LEDs may directly jeopardize life or health (such as in aviation, transportation,
traffic control equipment, medical and life support systems and safety devices).
The storage ambient for the LEDs should not exceed 30°C temperature or 70% relative humidity.
It is recommended that LEDs out of their original packaging are IR-reflowed within one week.
For extended storage out of their original packaging, it is recommended that the LEDs be stored in a
sealed container with appropriate desiccant, or in a desiccators with nitrogen ambient.
LEDs stored out of their original packaging for more than a week should be baked at about 60 deg C
for at least 24 hours before solder assembly.
Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED if necessary.
Recommended soldering conditions:
An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs
connected in parallel in an application, it is recommended that a current limiting resistor be incorporated
in the drive circuit, in series with each LED as shown in Circuit A below.
(A) Recommended circuit.
(B) The brightness of each LED might appear different due to the differences in the I-V characteristics
Pre-heat
Pre-heat time
Peak temperature
Soldering time
Use of a conductive wrist band or anti-electrostatic glove when handling these LEDs.
All devices, equipment, and machinery must be properly grounded.
Work tables, storage racks, etc. should be properly grounded.
Use ion blower to neutralize the static charge which might have built up on surface of the LED’s
plastic lens as a result of friction between LEDs during storage and handling.
of those LEDs.
Reflow soldering
Circuit model A
120~150°C
120 sec. Max.
240°C Max.
10 sec. Max.
LITE-ON TECHNOLOGY CORPORATION
LED
P r o p e r t y o f L i t e - O n O n l y
Pre-heat
Pre-heat time
Solder wave
Soldering time
CAUTIONS
Wave Soldering
100°C Max.
60 sec. Max.
260°C Max.
10 sec. Max.
Circuit model B
LED
Temperature
Soldering time
Page :
Soldering iron
9
300°C Max.
3 sec. Max.
(one time only)
of
11