TOTX179 Toshiba, TOTX179 Datasheet - Page 4

• Manufacturer Part Number: TOTX179
• Description: TRANSMITTER MODULE FIBER OPTIC
• Manufacturer: Toshiba
• Series: Toslink™r

Specifications of TOTX179

• Wavelength: 650nm
• Data Rate: 12.8Mbps
• Power - Output: -21 ~ -15dBm
• Voltage - Supply: 4.75 V ~ 5.25 V
• Applications: Digital Audio
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Current - Supply: -

(6)
(7)
(8)
(9)
(10) Input voltage
(11) Soldering condition
(12) Precautions when disposing of devices and packing materials.
(13) Precautions during use
Solvent
Protective cap
Supply voltage
Panel attachment
TOTX179 has hole for panel attachment. Please be sure to attach it to panel with self−tapping screw.
When using solvent for flux removal, do not use a high acid or high alkali solvent. Be careful not to
pour solvent in to the optical connector ports. If solvent is inadvertently poured in to them, clean it off
using cotton tips.
When the TOTX179 is not in use, attach the protective cap.
Use the supply voltage within the recommended operating condition (V
that supply voltage does not exceed the maximum rating value of 7 V, even for an instant.
If a voltage exceeding the maximum rating value (V
the internal IC may suffer damage. If there is a possibility that excessive voltage due to surges may
be added to the input terminal, insert a protective circuit.
Solder at 260°C or less for no more than ten seconds.
When disposing devices and packing materials, follow the procedures stipulated by local regulations
in order to protect the environment against contamination.
Compound semiconductors such as GaAs are used as LED materials in this module. When devices are
disposed of, worker safety and protection of the environment must be taken into account.
Toshiba is continually working to improve the quality and the reliability of their products.
Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical
sensitivity and their vulnerability to physical stress. It is the responsibility of the buyer, when
utilizing Toshiba products, to observe standards of safety, and to avoid situations in which the
malfunction or failure of a Toshiba product could cause loss of human life, bodily injury or damage to
property.
When developing equipment, please ensure that Toshiba products are used within the specified
operating ranges set forth in the most recent product specifications. Also, please keep in mind the
precautions and conditions set forth in the Toshiba Semiconductor Reliability Handbook.
4
CC
+ 0.5 V) is applied to the transmitters' input,
CC
= 5 ± 0.25 V). Make sure
2001-07-26
TOTX179