HFBR-1505A Avago Technologies US Inc., HFBR-1505A Datasheet - Page 2

• Manufacturer Part Number: HFBR-1505A
• Description: XMITTER FIBER OPTIC SERCOS SMA
• Manufacturer: Avago Technologies US Inc.

Specifications of HFBR-1505A

• Wavelength: 650nm
• Spectral Bandwidth: 21nm
• Voltage - Forward (vf) Typ: 2.1V
• Current - Dc Forward (if): 60mA
• Voltage - Dc Reverse (vr) (max): 3V
• Capacitance: 60pF
• Connector Type: SMA
• Function: Fiber Optic Transmitter for SERCOS, SMA Port
• Product: Transmitter
• Data Rate: 10 MBd
• Diode Capacitance: 60 pF
• Maximum Rise Time: 13 ns
• Maximum Fall Time: 10 ns
• Operating Supply Voltage: 5.5 VDC
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Package / Case: PDIP-6
• For Use With: Hard Clad Silica
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

The optical transmission
guideline is a supplement of the
German National DIN E 19258
standard draft. On the European
level, prEN 50254 is the draft of
the INTERBUS-S fieldbus.
Package Information
All HFBR-X5X5X series
transmitters and receivers are
housed in a low-cost, dual-in-line
package that is made of high
strength, heat resistant,
chemically resistant and UL 94
V-O (UL file # E121562) flame
retardant plastic. The
transmitters are easily identified
by the light grey colored
connector port. The receivers are
2
Specified Link Performance
0˚C to +70˚C unless otherwise noted.
Notes:
1. With recommended Tx and Rx circuits (60 mA nominal drive current).
2. POF HFBR-Exxyyy 0.23 dB/m worst case attentuation.
3. HCS
4. Including a 3 dB optical safety margin accounting for link service lifetime.
5. Including a 2 dB optical safety margin accounting for link service lifetime.
6. Signaling rate DC to 10 MBd.
7. Signaling rate DC to 2 MBd.
Parameter
Link Distance with
HFBR-1505A/2505A or
HFBR-1515B/2515B
Link Distance with
HFBR-1505C/2505C
Pulse Width Distortion
with HFBR-1505A/2505A
or HFBR-1515B/2515B
Pulse Width Distortion
with HFBR-1505C/2505C
CAUTION: The small junction size inherent in the design of these components increases the
components’ susceptibility to damage from electrostatic discharge (ESD). It is advised that normal
static precautions be taken in handling and assembly of these components to prevent damage and/or
degradation which may be induced by ESD.
®
10 dB/km worst case attenuation.
Symbol
PWD
PWD
1
1
easily identified by the dark grey
colored connector port. The
package is designed for auto-
insertion and wave soldering so it
is ideal for high volume production
applications.
Handling and Design Information
When soldering, it is advisable to
leave the protective cap on the unit
to keep the optics clean. Good
system performance requires clean
port optics and cable ferrules to
avoid obstructing the optical path.
Clean compressed air often is
sufficient to remove particles of
dirt; methanol on a cotton swab
also works well.
–125
Min.
–30
0.1
0.1
0.1
0.1
Max.
+125
+30
200
400
40
50
Unit
ns
ns
m
m
m
m
arbitrary duty cycle
Recommended Chemicals for
Cleaning/Degreasing X5X5X Products
Alcohols: methyl, isopropyl,
isobutyl.
Aliphatics: hexane, heptane.
Other: soap solution, naphtha.
Do not use partially halogenated
hydrocarbons such as
1,1,1 trichloroethane, ketones
such as MEK, acetone,
chloroform, ethyl acetate,
methylene dichloride, phenol,
methylene chloride or
N-methylpyrolldone. Also, Avago
does not recommend the use of
cleaners that use halogenated
hydrocarbons because of their
potential environmental harm.
25% to 75%
duty cycle
Condition
HCS
HCS
POF
POF
®
®
Notes 1,2,3,4,6
Notes 1,2,3,5,6
Notes 1,2,3,4,7
Notes 1,2,3,5,7
Reference
Note 1
Note 1