HFBR-5208EMZ Avago Technologies US Inc., HFBR-5208EMZ Datasheet - Page 9

• Manufacturer Part Number: HFBR-5208EMZ
• Description: TXRX 1X9 622MB/S SR METAL HOUSE
• Manufacturer: Avago Technologies US Inc.

Specifications of HFBR-5208EMZ

• Applications: General Purpose
• Data Rate: 622Mbps
• Wavelength: 1300nm
• Voltage - Supply: 4.75 V ~ 5.25 V
• Connector Type: SC
• Mounting Type: Through Hole
• Data Rate Max: 0.622Gbps
• Supply Voltage: 5V
• Wavelength Typ: 1300nm
• Peak Reflow Compatible (260 C): Yes
• Leaded Process Compatible: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Electrostatic Discharge (ESD)
There are two design cases in which immunity to ESD damage
is important.
The first case is during handling of the transceiver prior to
mounting it on the circuit board. It is important to use normal
ESD handling precautions for ESD sensitive devices. These pre-
cautions include using grounded wrist straps, work benches,
and floor mats in ESD controlled areas, etc.
The second case to consider is static discharges to the exterior
of the equipment chassis containing the transceiver parts. To
the extent that the duplex SC connector receptacle is exposed
to the outside of the equipment chassis, it may be subject to
whatever ESD system level test criteria that the equipment is
intended to meet.
Electromagnetic Interference (EMI)
Most equipment designs utilizing these high-speed transceiv-
ers from Avago will be required to meet the requirements
of FCC in the United States, CENELEC EN55022 (CISPR 22)
in Europe and VCCI in Japan.
The HFBR-5208xxxZ EMI has been characterized with a
chassis enclosure to demonstrate the robustness of the
parts. Performance of a system containing these transceiv-
ers will vary depending on the individual chassis design.
Regulatory Compliance - Targeted Specifications
The HFBR-5208xxxZ LED are classified as IEC 825-1 Accessible Emission Limit (AEL) Class 1. AEL Class 1 are considered eye safe.
9
Feature
Electrostatic Discharge (ESD) MIL-STD-883F
Electromagnetic Interference
(EMI)
Immunity
Eye Safety
Component Recognition
Test Method
Method 3015.7
RADIEC-61000-4-2
FCC Class B
CENELEC EN55022
Variation of IEC 61000-4-3
IEC 825-1 Class 1
Underwriters Laboratories and Canadian
Standards Association Joint Component
Recognition for Information Technology Equip-
ment including Electrical Business Equipment
Class B (CISPR 22B) VCCI Class 2
Immunity
Equipment utilizing these transceivers will be subject to
radio-frequency electromagnetic fields in some environ-
ments. These transceivers, with their integral shields,
have been characterized without the benefit of a normal
equipment chassis enclosure and the results are reported
below. Performance of a system containing these trans-
ceivers within a well- designed chassis is expected to be
better than the results of these tests without a chassis
enclosure.
Performance
Class 1 (>1000 V) - Human Body Model
Products of this design typically withstand 25 kV
without damage.
Margins are dependant on customer board and
chassis design. It is recommended that the flush
mount shield design (HFBR-5208FMZ) be used
for best EMI margin against FCC Class B.
Typically show no measurable effect from a 10
V/m field swept from 26 to 1000 MHz applied to
the transceiver when mounted to a circuit card
without a chassis enclosure.
LED Class 1
UL File#: E173874