GU256X64D-7000 Noritake Company Inc, GU256X64D-7000 Datasheet - Page 16

• Manufacturer Part Number: GU256X64D-7000
• Description: MODULE VF GRAPHIC DISPLAY 256X64
• Manufacturer: Noritake Company Inc
• Series: 7000r

Specifications of GU256X64D-7000

• Viewing Area: 115.05mm L x 28.60mm W
• Display Type: Graphic
• Format: 5 x 7 Dots
• Voltage - Supply: 4.75 V ~ 5.25 V
• Number Of Dots: 256 x 64
• Interface: Parallel/Serial
• Operating Temperature: -40°C ~ 85°C
• Resolution: 256 X 64
• Viewing Area (h X W): 28.65mm X 115.05mm
• Supply Voltage Range: 4.75V To 5.25V
• Operating Temperature Range: -20°C To +70°C
• Character Format: Dot Graphic
• Character Type: 5x7 Dot Matrix
• External: RoHS Compliant
• Description/function: Transformerless Display
• Interface Type: RS-232
• Data Bus Width: 8 bit
• Operating Voltage: 5 V
• Pixel Format: 256 x 64
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 286-1042 - KIT DEMO FOR 7000 SERIES VFD
• Outline L X W X H: -
• Character Size: -
• Display Format: -
• Lead Free Status / Rohs Status: Details
• Other names: 286-1067

7.1.5 HOM
7.1.6 CR
7.1.7 US $ xL xH yL yH
7.1.8 CLR
7.1.9 US C n
7.1.10 ESC@
Code:
Code:
Code:
Code:
Code:
Code:
Default:
Function: Select cursor ON or OFF.
Definable area:
Function: The cursor moves to specified X, Y position on display memory. If the specified X, Y
Function: The display screen is cleared and the cursor moves to home position after this
(Home Position)
0BH
Function: The cursor moves to the home position. This command effects on the current
window selected by “Current window select”.
(Carriage Return)
0DH
Function: The cursor moves to left end of same line. This command effects on the
current window selected by “Current window select”.
1FH 24H xL xH yL yH
xL: Cursor position x Lower byte (1 dot/unit)
xH: Cursor position x Upper byte (1 dot/unit)
yL: Cursor position y Lower byte (8 dot/unit)
yH: Cursor position y Upper byte(8 dot/unit)
position (X, Y, either or both) is over range, the command is ignored, and keep same
cursor position.
This command effects on the current window selected by “Current window select”.
(Display Clear)
0CH
command was executed. This command effects on the current window selected by
“Current window select”.
(Cursor ON/OFF)
1F 43H n
n: Display cursor ON/OFF select
n = 0
When cursor display ON is selected, the cursor position is displayed by 1x8 dots.
1BH 40H
Returns to default.
Jumper is not re-loaded.
The contents of receiving buffer remain in memory.
(Initialize Display)
0 ≦ (xL + xH x 256) ≦ 511
0 ≦ (yL + yH x 256) ≦ 7
n = 0 : Cursor OFF
n = 1 : Cursor ON
(Cursor Set)
- 15 -
GU256X64D-7000