DMF-50840NB-FW-AKE-AS Optrex America Inc, DMF-50840NB-FW-AKE-AS Datasheet - Page 17

• Manufacturer Part Number: DMF-50840NB-FW-AKE-AS
• Description: LCD GRAPHIC MOD 320X240
• Manufacturer: Optrex America Inc
• Series: DMF-50840r

Specifications of DMF-50840NB-FW-AKE-AS

• Display Mode: Transmissive
• Display Type: LCD - Monochrome
• Viewing Area: 120.00mm L x 90.00mm W
• Backlight: CCFL - White
• Dot Size: 0.33mm W x 0.33mm H
• Dot Pitch: 0.36mm x 0.36mm
• Dot Pixels: 320 x 240 (QVGA)
• Interface: Parallel
• Pixel Density: 320 x 240
• Fluid Type: STN
• Module Size (w X H X T): 167.1 mm x 109 mm x 11 mm
• Viewing Area (w X H): 120 mm x 90 mm
• Backlighting: CCFL White
• Background Color: Blue
• Attached Touch Screen: No
• Style: Monochrome
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 73-1235

DMF-50840NB-FW-AKE-AS (AS) No. 2001-0159
The Following precautions will guide you in handling our product correctly.
10. Precautions Relating Product Handling
1) Liquid crystal display devices
2) Care of the liquid crystal display module against static electricity discharge.
3) When the LCD module alone must be stored for long periods of time:
4) Use the module with a power supply that is equipped with an overcurrent protector circuit, since the
5) Do not ingest the LCD fluid itself should it leak out of a damaged LCD module.
6) Conductivity is not guaranteed for models that use metal holders where solder connections between
7) For models which use CFL:
8) For models which use touch panels:
9) For models which use COG,TAB,or COF:
10) Models which use flexible cable, heat seal, or TAB:
1. The liquid crystal display device panel used in the liquid crystal display module is made of plate
2. The polarizer adhering to the surface of the LCD is made of a soft material.
2. Avoid the use of work clothing made of synthetic fibers. We recommend cotton clothing or other
3. Slowly and carefully remove the protective film from the LCD module, since this operation can
1. Protect the modules from high temperature and humidity.
2. Keep the modules out of direct sunlight or direct exposure to ultraviolet rays.
3. Protect the modules from excessive external forces.
1. High voltage of 1000V or greater is applied to the CFL cable connector area.
2. Protect CFL cables from rubbing against the unit and thus causing the wire jacket to become worn.
3.The use of CFLs for extended periods of time at low temperatures will significantly shorten their
1.Do not stack up modules since they can be damaged by components on neighboring
2.Do not place heavy objects on top of the product. This could cause glass breakage.
1.The mechanical strength of the product is low since the IC chip faces out unprotected from the rear.
2.Given the fact that the rear of the IC chip is left exposed, in order to protect the unit from electrical
1.In order to maintain reliability, do not touch or hold by the connector area.
1. When working with the module, be sure to ground your body and any electrical equipment you may
module is not provided with this protective feature.
Should hands or clothing come in contact with LCD fluid, wash immediately with soap.
the metal holder and the PCB are not used. Please contact us to discuss appropriate ways to
assure conductivity.
Care should be taken not to touch connection areas to avoid burns.
modules.
Be sure to protect the rear of the IC chip from external forces.
Guard against scratching it.
glass. Avoid any strong mechanical shock. Should the glass break handle it with care.
be using. We strongly recommend the use of anti static mats ( made of rubber ), to protect work
tables against the hazards of electrical shock.
conductivity-treated fibers.
generate static electricity.
service life.
damage, avoid installation configurations in which the rear of the IC chip runs the risk of making
any electrical contact.
OPTREX CORPORATION
Page 17/18