GLK12232-25-SM-WB Matrix Orbital, GLK12232-25-SM-WB Datasheet - Page 18
![LCD GRAPHIC DISPL 122X32 BLU/WHT](/photos/7/91/79174/glk12232-25-sm-wb_front_sml.jpg)
GLK12232-25-SM-WB
Manufacturer Part Number
GLK12232-25-SM-WB
Description
LCD GRAPHIC DISPL 122X32 BLU/WHT
Manufacturer
Matrix Orbital
Datasheet
1.GLK12232-25-SM-WB.pdf
(42 pages)
Specifications of GLK12232-25-SM-WB
Display Type
LCD - Monochrome
Display Mode
Transmissive
Viewing Area
60.20mm L x 18.00mm W
Dot Size
0.40mm W x 0.40mm H
Dot Pitch
0.44mm x 0.44mm
Dot Pixels
122 x 32
Interface
I²C, RS232, TTL
Pixel Density
32 x 122
Module Size (w X H X T)
86 mm x 35 mm x 14.4 mm
Viewing Area (w X H)
60.2 mm x 18 mm
Backlighting
Blue
Background Color
Blue
Operating Temperature Range
- 20 C to + 70 C
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Backlight
-
Lead Free Status / Rohs Status
Details
Other names
635-1001
example, shades of grey are not supported.
5.2 Graphics Commands
toward the right) and Y values go from 0 to 63 (increasing toward the bottom).
5.2.1 Set Drawing Colour (254 99 [color])
color passed as a parameter. The parameter [color] is the value of the color where white 0 Hex, and black is
255 Hex.
5.2.2 Draw Line (254 108 [x1][y1][x2][y2])
be drawn from any part of the display to any other part, but may be important to note that the line may
interpolate differently right to left, or left to right. This means that a line drawn in white from right to left
may not fully erase the same line drawn in black from left to right.
5.2.3 Continue Line (254 101 [x][y])
command uses the global drawing color so the “Set drawing color” command should be used before the first
line segment if required.
5.2.4 Put Pixel (254 112 [x][y])
requests fast enough to keep up with a steady stream at 115 kbaud, so flow control is not required.
5.2.5 Draw Outline Rectangle (254 114 [color][x1][y1][x2][y2])
corner is specified by (x1,y1) and the bottom right corner by (x2,y2).
Matrix Orbital
Each pixel in a bitmap is described by a single bit, and may only have the values ON or OFF. For
In this section commands are identified by their names and decimal values.
The coordinate origin (0,0) is at the top left corner of the display. X values go from 0 to 239 (increasing
This command sets the drawing color for subsequent graphic commands that do not have the drawing
This command will draw a line from (x1,y1) to (x2,y2) using the current drawing color. Lines may
This command will draw line with the current drawing color from the last line end (x2,y2) to (x,y). This
This command will draw a pixel at (x,y) using the current drawing color. The unit processes these
This command draws a rectangular box in the specified color (0 = white, non-zero = black). The top left
NOTE All non-zero values will display as black.
GLK12232-25-SM
14