NHD-0208BZ-RN-YBW-3V Newhaven Display, NHD-0208BZ-RN-YBW-3V Datasheet - Page 7

• Manufacturer Part Number: NHD-0208BZ-RN-YBW-3V
• Description: LCD MOD CHAR 2X8 REFL
• Manufacturer: Newhaven Display

Specifications of NHD-0208BZ-RN-YBW-3V

• Display Type: STN - Super-Twisted Nematic
• Display Mode: Reflective
• Number Of Digits/alpha: 16
• Outline L X W X H: 58.00mm x 32.00mm x 9.50mm
• Viewing Area: 38.00mm L x 16.00mm W
• Backlight: Without Backlight
• Display Format: 8 x 2
• Character Size: 5.56mm H x 2.96mm W
• Character Format: 5 x 7 CURS
• Voltage - Supply: 2.7 V ~ 3.3 V
• Dot Size: 0.56mm W x 0.66mm H
• Interface: Parallel
• Operating Temperature: -20°C ~ 70°C
• Character Count X Line: 8 x 2
• Module Size (w X H X T): 58 mm x 32 mm x 9.5 mm
• Fluid Type: STN Positive
• Background Color: Yellow/Green
• Voltage Rating: 3 V
• Operating Temperature Range: - 20 C to + 70 C
• Backlight Type: None
• For Use With: NHDEV - BOARD DEV LCD COG TFT 100X95MM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Example Initialization Program
8-bit Initialization:
/**********************************************************/
void command(char i)
{
}
/**********************************************************/
void write(char i)
{
}
/**********************************************************/
void init()
{
}
/**********************************************************/
P1 = i;
D_I =0;
R_W =0;
E
Delay(1);
P1 = i;
D_I =1;
R_W =0;
E
Delay(1);
E
E = 0;
Delay(100);
command(0x30);
Delay(30);
command(0x30);
Delay(10);
command(0x30);
Delay(10);
command(0x38);
command(0x10);
command(0x0c);
command(0x06);
E
= 1;
= 1;
= 0;
= 0;
//put data on output Port
//D/I=LOW : send instruction
//R/W=LOW : Write
//enable pulse width
//Clock enable: falling edge
//put data on output Port
//D/I=LOW : send data
//R/W=LOW : Write
//enable pulse width
//Clock enable: falling edge
//Wait >15 msec after power is applied
//command 0x30 = Wake up
//must wait 5ms, busy flag not available
//command 0x30 = Wake up #2
//must wait 160us, busy flag not available
//command 0x30 = Wake up #3
//must wait 160us, busy flag not available
//Function set: 8-bit/2-line
//Set cursor
//Display ON; Cursor ON
//Entry mode set
[7]
>= 300ns
>= 300ns