B32672Z4224K000 EPCOS Inc, B32672Z4224K000 Datasheet - Page 17

• Manufacturer Part Number: B32672Z4224K000
• Description: CAP .22UF 450V 10% METAL POLYPRO
• Manufacturer: EPCOS Inc
• Series: MKP B32672Zr

Specifications of B32672Z4224K000

• Capacitance: 0.22µF
• Package / Case: Radial
• Voltage - Ac: 220V
• Voltage - Dc: 450V
• Dielectric Material: Polypropylene, Metallized
• Tolerance: ±10%
• Operating Temperature: -55°C ~ 125°C
• Mounting Type: Through Hole
• Size / Dimension: 0.709" L x 0.236" W (18.00mm x 6.00mm)
• Height: 0.433" (11.00mm)
• Termination: PC Pins
• Lead Spacing: 0.591" (15.00mm)
• Features: AC and Pulse
• Tolerance (+ Or -): 10%
• Voltage: 450VDC
• Temp Coeff (dielectric): PLYP
• Mounting Style: Through Hole
• Construction: Radial
• Failure Rate: Not Required
• Seated Plane Height: 11mm
• Product Diameter (mm): Not Requiredmm
• Product Height (mm): 11mm
• Product Depth (mm): 6mm
• Product Length (mm): 18mm
• Lead Spacing (nom): 15mm
• Lead Diameter (nom): 0.8mm
• Operating Temp Range: -55C to 110C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Esr (equivalent Series Resistance): -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: B32672Z4224K

Cautions and warnings
The table below summarizes the safety instructions that must always be observed. A detailed de-
scription can be found in the relevant sections of the chapters "General technical information" and
"Mounting guidelines".
Topic
Storage conditions
Flammability
Resistance to
vibration
Please read Cautions and warnings and
Important notes at the end of this document.
Do not exceed the upper category temperature (UCT).
Do not apply any mechanical stress to the capacitor terminals.
Avoid any compressive, tensile or flexural stress.
Do not move the capacitor after it has been soldered to the PC board.
Do not pick up the PC board by the soldered capacitor.
Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified
lead spacing.
Do not exceed the specified time or temperature limits during soldering.
Avoid external energy inputs, such as fire or electricity.
Avoid overload of the capacitors.
Safety information
Make sure that capacitors are stored within the
specified range of time, temperature and humidity
conditions.
Avoid external energy, such as fire or electricity
(passive flammability), avoid overload of the
capacitors (active flammability) and consider the
flammability of materials.
Do not exceed the tested ability to withstand
vibration. The capacitors are tested to
IEC 60068-2-6.
EPCOS offers film capacitors specially designed
for operation under more severe vibration regimes
such as those found in automotive applications.
Consult our catalog "Film Capacitors for
Automotive Electronics".
Page 17 of 22
Power Factor Correction
B32671Z ... B32673Z
Reference chapter
"General technical
information"
4.5
"Storage conditions"
5.3
"Flammability"
5.2
"Resistance to vibration"