MT18VDDT6472G-262G3 Micron Technology Inc, MT18VDDT6472G-262G3 Datasheet - Page 29

• Manufacturer Part Number: MT18VDDT6472G-262G3
• Description: MODULE SDRAM DDR 512MB 184DIMM
• Manufacturer: Micron Technology Inc

Specifications of MT18VDDT6472G-262G3

• Memory Type: DDR SDRAM
• Memory Size: 512MB
• Speed: 266MT/s
• Package / Case: 184-DIMM
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

NOTE:
pdf: 09005aef808a331f, source: 09005aef80858037
DD18C32_64_128_256x72G.fm - Rev. E 9/04 EN
1. Micron Technology, Inc. recommends a minimum air flow of 1 meter/second (~197 LFM) across the module.
2. The component case temperature measurements shown above were obtained experimentally. The typical system to be
3. Temperature versus air speed data is obtained by performing experiments with the system motherboard removed from
4. The memory diagnostic software used for determining worst-case component temperatures is a memory diagnostic soft-
used for experimental purposes is a dual-processor 600 MHz work station, fully loaded, with four comparable registered
memory modules. Case temperatures charted represent worst-case component locations on modules installed in the
internal slots of the system.
its case and mounted in a Eiffel-type low air speed wind tunnel. Peripheral devices installed on the system motherboard
for testing are the processor(s) and video card, all other peripheral devices are mounted outside of the wind tunnel test
chamber.
ware application developed for internal use by Micron Technology, Inc.
100
90
80
70
60
50
40
30
20
Figure 12: Component Case Temperature vs. Air Flow
T
T
max
ave
- memory stress software
- memory stress software
T
256MB, 512MB, 1GB, 2GB (x72, ECC, SR)
ave
Air Flow (meters/sec)
- 3D gaming software
29
Micron Technology, Inc., reserves the right to change products or specifications without notice.
184-PIN DDR SDRAM RDIMM
Ambient Temperature = 25º C
Minimum Air Flow
©2004 Micron Technology, Inc. All rights reserved.