OMNISMART700 Tripp Lite, OMNISMART700 Datasheet - Page 3

• Manufacturer Part Number: OMNISMART700
• Description: BATT BACKUP 700VA 6OUTLET/RJ11
• Manufacturer: Tripp Lite
• Series: OmniSmart™r
• Type: UPSr

Specifications of OMNISMART700

• Rohs Status: Not applicable
• Power - Rated: 700VA / 450W
• Ac Outlets: 6 (3 UPS, 3 Surge Only)
• Features: DB9 and USB Communications
• Backup Time - Max Load: 7 minutes
• Media Lines Protected: 1 - RJ11 Line
• Voltage - Output Per Connector: 120V
• Voltage - Input: 120V / 15A
• Cord Length: 6' (1.83m)
• Ac Input Connector: NEMA 5-15P
• Connector - Ac Output: NEMA 5-15R
• Size: 7.50" L x 5.25" W x 10.75" H (190.5mm x 133.4mm x 273.1mm)
• Weight: 20 lbs (9.1kg)
• Ac Output Connector: NEMA 5-15R
• Power Rating: 700 VA
• Output Voltage Rating: 120 V
• Number Of Outlets: 6
• Interface Port: USB
• Runtime (full Load): 7 min
• Runtime (half Load): 22 min
• Topology: Line Interactive
• Tower / Rackmount: Tower
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: OMNISMART700PNP; TL174

Input cord length (ft.)
Input cord length (m)
BATTERY
Full load runtime (minutes)
Half load runtime (minutes)
DC system voltage (VDC)
Battery recharge rate
(included batteries)
Replacement battery
cartridge (internal UPS
battery replacement)
Battery Access
Battery replacement
description
VOLTAGE REGULATION
Voltage regulation
description
Overvoltage correction
Undervoltage correction
Severe undervoltage
correction
LEDS ALARMS & SWITCHES
LED Indicators
Alarms
Alarm cancel operation
Switches
SURGE / NOISE SUPPRESSION
UPS AC suppression joule
rating
UPS AC suppression
response time
UPS Dataline suppression
EMI / RFI AC noise
suppression
AC suppression joule rating
AC suppression response
time
Dataline suppression
PHYSICAL
Installation form factors
supported with included
accessories
6
1.8
4 min. (450w)
17 min. (225w)
12
Less than 4.5 hours from 10% to 90%
RBC51
Battery access door
Hot-swappable, user replaceable batteries
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 75 to 147
Input voltages between 128 and 147 are reduced by 12%
Input voltages between 93 and 107 are boosted by 14%
Input voltages between 75 and 92 are boosted by 30%
4 LEDs indicate line power, battery power, overload and battery low/replace status
Audible alarm indicates power-failure and low-battery conditions
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
2 Switches control off/on power status and alarm-cancel/self-test operation
510
Instantaneous
1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet
Yes
510
Instantaneous
1 line TEL / DSL or 10Base T Ethernet protection
Tower