76650-0232 Molex Inc, 76650-0232 Datasheet - Page 4

• Manufacturer Part Number: 76650-0232
• Description: KIT CONN HIGH SPEED B-B 6PC
• Manufacturer: Molex Inc
• Series: Plateau HS Mezz™, SEARAY, SEARAY Slimr

Specifications of 76650-0232

• Kit Type: Board to Board - Arrays, Edge Type, Mezzanine
• Values: 6 pcs - Assorted Connector, Plug, Receptacle
• Kit Contents: (1) 46556-4145-ND - CONN SNGL-END ARRAY MALE 160POS(1) WM17215-ND - CONN PLUG 48POS 1.2MM VERT SMD(1) WM17206CT-ND - CONN RECEPT 48POS 1.2MM VERT SMD
• Product Type: Kits
• Mounting Style: Wire, PCB
• Mounting Angle: Vertical
• Number Of Positions / Contacts: 40 to 300
• Voltage Rating: 30 V to 240 V
• Current Rating: 1.5 A to 2.7 A
• Pitch: 1.2 mm
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: Plateau HS Mezz, SEARAY, SEARAY Slim Connectors
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 076650-0232; 076650-0232-E; 0766500232; 0766500232-E; 76650-0232-E; 766500232; 766500232-E; WM9036

REVISION:
DOCUMENT NUMBER:
B
5.4 Environmental Performance
PS-75005-001
5.3.2 Durability: Mate and unmate for 25 cycles at 500 cycles per hour, without physical damage
5.3.3 Durability (Preconditioning): Mate and unmate for 5 cycles at 500 cycles per hour, without
5.3.4 Reseating: Mate and unmate for 3 cycles, without physical damage.
5.3.4 Vibration: There shall be no evidence of physical damage or a change in contact resistance
5.3.6 Retention Force (Chicklet to Housing): Specimens shall remain mated when a force of
5.3.7 Axial Force (Soldered Housing to Board): Specimens shall remain attached to the board
5.3.8 Side Load Force (Soldered Housing to Board): Specimens shall remain attached to the
5.4.1 Thermal Shock: There shall be no change in contact resistance greater than 10mOhms from
ECR/ECN INFORMATION:
EC No:
DATE:
# of Ckts
12
24
48
72
or exceeding a change in contact resistance of 10 mOhms. Test per EIA-364-09.
physical damage or exceeding a change in contact resistance of 10 mOhms. Test per EIA-
364-09.
of 10 mOhms when mated specimens are subjected to 3.10 G’s rms between 20-500 Hz
for 15 minutes in each of 3 mutually perpendicular planes(X-Y-Z). Test per EIA-364-28,
Test Condition VII, Condition D.
3.33N is applied. The load shall be applied in the axial direction. Test per EIA-364-38.
when a minimum force of 26.69 N per ground peg is applied. See Table. Assumes 50%
peg coverage with solder fillet at the top, per AS-75005-001.
board when a minimum force of 17.79 N per ground peg is applied. See Table. Assumes
50% peg coverage with solder fillet at the top, per AS-75005-001.
initial when mated specimens are subjected to 10 cycles between -55
minute dwell times. Test per EIA-364-32, Condition 1.
UCP2003-2204
2003 / 04 / 10
PRODUCT SPECIFICATION
HIGH SPEED MEZZANINE
# Differential
TITLE:
CREATED / REVISED BY:
Pairs
12
24
36
6
Ken Stiles
BOARD TO BOARD CONNECTOR SYSTEM
PRODUCT SPECIFICATION FOR THE
HIGH SPEED MEZZANINE
Axial Force (N)
160.14
240.21
53.38
80.07
Min
CHECKED BY:
Ken Stiles
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC
Side Load Force (N)
106.74
160.11
o
35.58
53.37
Min
C and 85
Manny Banakis
APPROVED BY:
o
C with 30
SHEET No.
4
of
7