PS2505-2 CEL, PS2505-2 Datasheet - Page 11

• Manufacturer Part Number: PS2505-2
• Description: OPTO COUPLER 2 CH TRANS
• Manufacturer: CEL
• Series: NEPOCr

Specifications of PS2505-2

• Number Of Channels: 2
• Input Type: AC, DC
• Voltage - Isolation: 5000Vrms
• Current Transfer Ratio (min): 80% @ 5mA
• Current Transfer Ratio (max): 600% @ 5mA
• Voltage - Output: 80V
• Current - Output / Channel: 50mA
• Current - Dc Forward (if): ±80mA
• Vce Saturation (max): 300mV
• Output Type: Transistor
• Mounting Type: Through Hole
• Package / Case: 8-DIP
• Isolation Voltage: 5000 Vrms
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: PS2505-2NEC

(4) Cautions
2. Cautions regarding noise
3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
• Fluxes
collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute
maximum ratings.
to product.
standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially
below I
like into consideration before use.
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
Check the setting values before use, since the forward current conditions at CTR measurement differ according
When using products other than at the specified forward current, the characteristics curves may differ from the
Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
F
= 1 mA.
Data Sheet PN10228EJ03V0DS
PS2505-1,-4,PS2505L-1,-4
11