PS2801A-1-L-A CEL, PS2801A-1-L-A Datasheet - Page 12
![OPTOISOLATOR 1CH TRANS OUT 4SSOP](/photos/7/70/77085/51-4-ssop_sml.jpg)
PS2801A-1-L-A
Manufacturer Part Number
PS2801A-1-L-A
Description
OPTOISOLATOR 1CH TRANS OUT 4SSOP
Manufacturer
CEL
Series
NEPOCr
Specifications of PS2801A-1-L-A
Number Of Channels
1
Input Type
DC
Voltage - Isolation
2500Vrms
Current Transfer Ratio (min)
100% @ 5mA
Current Transfer Ratio (max)
300% @ 5mA
Voltage - Output
70V
Current - Output / Channel
30mA
Current - Dc Forward (if)
30mA
Vce Saturation (max)
300mV
Output Type
Transistor
Mounting Type
Surface Mount
Package / Case
4-SSOP
Isolation Voltage
2500 Vrms
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
(4) Cautions
2. Cautions regarding noise
3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler
USAGE CAUTIONS
12
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute
maximum ratings.
to product.
standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially
below I
like into consideration before use.
• Fluxes
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
Check the setting values before use, since the forward current conditions at CTR measurement differ according
When using products other than at the specified forward current, the characteristics curves may differ from the
Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
F
= 1 mA.
Data Sheet PN10251EJ04V0DS
PS2801-1,PS2801-4