PS2561AL-1-F3-A CEL, PS2561AL-1-F3-A Datasheet - Page 11
![PHOTOCOUPLER 1CH TRANS OUT SM](/photos/7/69/76962/ps2561al-1-f3-a_sml.jpg)
PS2561AL-1-F3-A
Manufacturer Part Number
PS2561AL-1-F3-A
Description
PHOTOCOUPLER 1CH TRANS OUT SM
Manufacturer
CEL
Series
NEPOCr
Datasheet
1.PS2561AL2-1-V-E3-L-A.pdf
(15 pages)
Specifications of PS2561AL-1-F3-A
Number Of Channels
1
Input Type
DC
Voltage - Isolation
5000Vrms
Current Transfer Ratio (min)
50% @ 5mA
Current Transfer Ratio (max)
400% @ 5mA
Voltage - Output
70V
Current - Output / Channel
30mA
Current - Dc Forward (if)
30mA
Vce Saturation (max)
300mV
Output Type
Transistor
Mounting Type
Surface Mount
Package / Case
4-SMD
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
PS2561AL-1TR
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
PS2561AL-1-F3-AW
Manufacturer:
CAPELLA
Quantity:
3 563
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
(2) Wave soldering
(3) Soldering by soldering iron
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220 C
• Time to preheat temperature from 120 to 180 C
• Number of reflows
• Flux
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
• Peak temperature (lead part temperature)
• Time (each pins)
• Flux
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100 C.
260 C or below (molten solder temperature)
10 seconds or less
120 C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
Data Sheet PN10222EJ08V0DS
350 C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1
260 C or below (package surface temperature)
10 seconds or less
60 seconds or less
120 30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
11