KS8995MAI Micrel Inc, KS8995MAI Datasheet - Page 33

• Manufacturer Part Number: KS8995MAI
• Description: IC SWITCH 10/100 5PORT 128PQFP
• Manufacturer: Micrel Inc

Specifications of KS8995MAI

• Applications: *
• Mounting Type: Surface Mount
• Package / Case: 128-MQFP, 128-PQFP
• Number Of Primary Switch Ports: 5
• Internal Memory Buffer Size: 64
• Operating Supply Voltage (typ): 1.8/2.5/3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII/SNI
• Power Supply Type: Analog/Digital
• Package Type: PQFP
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Temperature Classification: Industrial
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With: 576-1017 - BOARD EVAL EXPERIMENT KS8995M
• Lead Free Status / RoHS Status: Not Compliant, Contains lead / RoHS non-compliant
• Other names: 576-1019

Configuration Interface
The KS8995MA can function as a managed switch or unmanaged switch. If no EEPROM or micro-controller exists, the
KS8995MA will operate from its default setting. Some default settings are configured via strap in options as indicated in the
table below.
Note:
1. NC = No connect.
May 2005
KS8995MA
Ipd = Input w/ internal pull-down.
Ipd/O = Input w/ internal pull-down during reset, output pin otherwise.
Fulld = Full duplex.
Pin #
45
46
62
63
64
65
66
67
68
80
81
82
83
1
Pin Name
MDI-XDIS
PMRXER
PMRXD3
PMRXD2
PMRXD1
PMRXD0
SMRXD3
SMRXD2
SMRXD1
SMRXD0
MUX1
MUX2
PCRS
PCOL
PU/PD
Ipd/O
Ipd/O
Ipd/O
Ipd/O
Ipd/O
Ipd/O
Ipd/O
Ipd/O
Ipd/O
Ipd/O
Ipd/O
NC
NC
Ipd
(1)
Description
Disable auto MDI/MDI-X.
PD = (default) = normal operation.
PU = disable auto MDI/MDI-X on all ports.
Factory test pins. MUX1 and MUX2 should be left unconnected for normal operation.
Mode
Normal Operation
PHY[5] MII receive bit 3. Strap option: PD (default) = enable flow control;
PU = disable flow control.
PHY[5] MII receive bit 2. Strap option: PD (default) = disable back pressure;
PU = enable back pressure.
PHY[5] MII receive bit 1. Strap option: PD (default) = drop excessive collision
packets; PU = does not drop excessive collision packets.
PHY[5] MII receive bit 0. Strap option: PD (default) = disable aggressive back-off
algorithm in half-duplex mode; PU = enable for performance enhancement.
PHY[5] MII receive error. Strap option: PD (default) = 1522/1518 bytes;
PU = packet size up to 1536 bytes.
PHY[5] MII carrier sense/force duplex mode. See “Register 76” for port 4 only.
PD (default) = force half-duplex if auto-negotiation is disabled or fails. PU = force
full-duplex if auto-negotiation is disabled or fails.
PHY[5] MII collision detect/force flow control. See “Register 66” for port 4 only.
PD (default) = no force flow control. PU = force flow control.
Switch MII receive bit 3. Strap option: PD (default) = disable switch MII full-duplex
flow control; PU = enable switch MII full-duplex flow control.
Switch MII receive bit 2. Strap option: PD (default) = switch MII in full-duplex mode;
PU = switch MII in half-duplex mode.
Switch MII receive bit 1. Strap option: PD (default) = switch MII in 100Mbps mode;
PU = switch MII in 10Mbps mode.
Switch MII receive bit 0; Strap option: LED mode PD (default) = mode 0;
PU = mode 1. See “Register 11.”
LEDX_2
LEDX_1
LEDX_0
(1)
33
Mode 0
Lnk/Act
Fulld/Col
Speed
MUX1
NC
Mode 1
100Lnk/Act
10Lnk/Act
Fulld
M9999-051305
Micrel, Inc.
MUX2
NC