BD3500FVM-TR Rohm Semiconductor, BD3500FVM-TR Datasheet - Page 14
![no-image](/images/manufacturer_photos/0/5/572/rohm_semiconductor_sml.jpg)
BD3500FVM-TR
Manufacturer Part Number
BD3500FVM-TR
Description
IC REG LDO 1.8V NCH FET 8MSOP
Manufacturer
Rohm Semiconductor
Type
Positive Fixedr
Datasheet
1.BD3502FVM-TR.pdf
(17 pages)
Specifications of BD3500FVM-TR
Number Of Outputs
1
Voltage - Output
1.8V
Voltage - Input
4.5 ~ 5.5 V
Operating Temperature
-10°C ~ 100°C
Package / Case
8-MSOP
Polarity
Positive
Output Type
Fixed
Output Voltage
1.8 V
Line Regulation
0.5 % / V
Load Regulation
10 mV
Input Voltage Max
5.5 V
Maximum Operating Temperature
+ 100 C
Minimum Operating Temperature
- 40 C
Maximum Power Dissipation
437.5 mW
Mounting Style
SMD/SMT
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Current - Supply
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
BD3504FVM,BD3500FVM,BD3501FVM,BD3502FVM
© 2010 ROHM Co., Ltd. All rights reserved.
www.rohm.com
10. Output capacitor (C5)
11. Input capacitor setting method (C1, C4)
12. NRCS terminal capacitor setting method (C3)
13. SCP terminal capacitor setting method (C2)
14. Input terminals (VCC, VIN, EN)
15. Maximum output current (maximum load)
16. Operating ranges
17. Allowable loss Pd
18. The use in the strong electromagnetic field may sometimes cause malfunction, to which care must be taken.
19.In the event that load containing a large inductance component is connected to the output terminal, and generation of
20. We are certain that examples of applied circuit diagrams are recommendable,
Connect the output capacitor between Vo1, Vo2 terminals and GND terminal without fail in order to stabilize output voltage.
The output capacitor has a role to compensate for the phase of loop gain and to reduce output voltage fluctuation when
load is rapidly changed. When there is an insufficient capacity value, there is a possibility to cause oscillation, and when
the equivalent serial resistance (ESR) of the capacitors is large, output voltage fluctuation is increased when load is rapidly
changed. About 220 µF high-performance electrolytic capacitors are recommended, but this greatly depends on the gate
capacity of external MOSFET and mutual conductance (gm), temperature and load conditions. In addition, when only
ceramic capacitors with low ESR are used, or various capacitors are connected in series, the total phase allowance of loop
gain becomes not sufficient, and oscillation may result. Thoroughgoing confirmation at application temperature and
under load range conditions is requested.
The input capacitor plays a part to lower output impedance of a power supply connected to input terminals (Vcc, VIN).
When output impedance of this power supply increases, the input voltages (Vcc, VIN) become unstable and there is a
possibility of giving rise to oscillation and degraded ripple rejection characteristics. The use of capacitors of about 10 µF
with low ESR, which provide less capacity value changes caused by temperature changes, is recommended, but since
input capacitor greatly depends on characteristics of the power supply used for input, substrate wiring pattern, and
MOSFET gate-drain capacity, thoroughgoing confirmation under the application temperature, load range, and M-MOSFET
conditions is requested.
To the present IC, there mounted is a function (Non Rush Current on Start-up: NRCS) to prevent rush current from VIN to
load and output capacitor via Vo at the output voltage start-up. When the EN terminal is reset from Hi or UVLO, constant
current is allowed to flow from the NRCS terminal. By this current, voltage generated at the NRCS terminal becomes the
reference voltage and output voltage is started. In order to stabilize the NRCS set time, it is recommended to use a
capacitor (B special) with less capacity value change caused by temperature change.
The present IC incorporates a timer-latch type short-circuit protection circuit in order to prevent MOSFET from being
destroyed by abnormal current when output terminal is short-circuited (operates at the time of NRCS, too). When the
output terminal voltage drops 30% from output setting voltage, IC judges that the output is short-circuited. In such event,
constant current begins to flow. When the voltage generated in the SCP terminal reaches 1.3V (Typ) by this current, the
gate terminal is brought to the Low level. In order to stabilize the SCP setting time, a capacitor (B special) with less
capacity value change caused by temperature changes is recommended.
short-circuit the SCP terminal to the GND terminal. In addition, when the output terminal is short-circuited, the MOSFET
gate voltage reaches the Vcc voltage and the large current that meets MOSFET characteristics flows to the output while
the timer latch type protection circuit operates. When the current capacity of VIN terminal power supply lacks, the Vin
terminal voltage lowers and the UVLO circuit operates, and the latch operation may not be finished. In such event,
connect a limiting resistor across drain terminal and VIN terminal of MOSFET.
In the present IC, N terminal, VIN terminal, and VCC terminal have an independent construction. In addition, in order to
prevent malfunction at the time of low input, the UVLO function is equipped with the VIN terminal and the VCC terminal.
They begin to start output voltage when all the terminals reach threshold voltage without depending on the input order of
input terminals.
The maximum output current capacity of the power supply which is composed by the use of the present IC depends on the
external FET. Consequently, confirm the characteristics of the power required for the set to be used, choose the external
FET.
If it is within the operating ranges, certain circuit functions and operations are warranted in the working ambient
temperature range.
characteristics but there are no sudden variations in characteristic values within these ranges.
With respect to the allowable loss, the thermal derating characteristics are shown in the Exhibit, which we hope would be
used as a good-rule-of-thumb. Should the IC be used in such a manner to exceed the allowable loss, reduction of current
capacity due to chip temperature rise, and other degraded properties inherent to the IC would result. You are strongly
urged to use the IC within the allowable loss.
back-EMF at the start-up and when output is turned OFF is assumed, it is requested to insert a protection diode.
but you are requested to thoroughly confirm the characteristics before using the IC.
In addition, when the IC is used with the external circuit changed, decide the IC
with sufficient margin provided
while consideration is being given not only to static characteristics but also
variations of external parts and our IC including transient characteristics.
With respect to characteristic values, it is unable to warrant standard values of electric
14/16
When the SCP function is not used,
(Example)
OUTPUT PIN
Technical Note
2010.05 - Rev.A