ADM1026JSTZ ON Semiconductor, ADM1026JSTZ Datasheet - Page 45

• Manufacturer Part Number: ADM1026JSTZ
• Description: IC CNTRL SYS REF/EEPROM 48LQFP
• Manufacturer: ON Semiconductor

Specifications of ADM1026JSTZ

• Function: Hardware Monitor
• Topology: ADC, Comparator, Multiplexer, Register Bank
• Sensor Type: External & Internal
• Sensing Temperature: 0°C ~ 100°C, External Sensor
• Output Type: SMBus™
• Output Alarm: No
• Output Fan: Yes
• Voltage - Supply: 3 V ~ 5.5 V
• Operating Temperature: 0°C ~ 100°C
• Mounting Type: Surface Mount
• Package / Case: 48-LFQFP
• Temperature Threshold: + 150 C
• Full Temp Accuracy: 3 C
• Digital Output - Bus Interface: 2-Wire
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 3 V
• Maximum Operating Temperature: + 100 C
• Minimum Operating Temperature: 0 C
• Supply Current: 2.5 mA
• Supply Voltage Range: 3V To 5.5V
• Digital Ic Case Style: LQFP
• No. Of Pins: 48
• Operating Temperature Range: 0°C To +100°C
• Sensor Case Style: LQFP
• Filter Terminals: SMD
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Table 45. Register 23h, Status Register 4 (Power−On Default, 00h)
Bit
0
1
2
3
4
5
6
7
INT Temp Status = 0
GPIO16 Status = 0
THERM Status = 0
V
AFC Status = 0
A
CI Status = 0
BAT
IN8
Unused
Name
Status = 0
Status = 0
R/W
R/W
R
R
R
R
R
R
R
R
1, if INT value is above the high limit or below the low limit on the previous
conversion cycle, 0 otherwise. This bit is set (once only) if a THERM mode is
engaged as a result of INT temperature readings exceeding the INT THERM limit.
This bit is also set (once only) if THERM mode is disengaged as a result of internal
temperature readings going 5°C below Int THERM limit.
1, if V
conversion cycle, 0 otherwise.
1, if A
conversion cycle, 0 otherwise.
This bit is set (once only) if a THERM mode is engaged as a result of temperature
readings exceeding the THERM limits on any channel. This bit is also set (once
only) if THERM mode is disengaged as a result of temperature readings going 5°C
below THERM limits on any channel.
This bit is set (once only) if the fan turns on when in automatic fan speed control (AFC)
mode as a result of a temperature reading exceeding T
also set (once only) if the fan turns off when in automatic fan speed control mode.
Unused. Reads back 0.
This bit latches a chassis intrusion event.
When GPIO16 is configured as an input, this bit is set when GPIO16 is asserted.
(Asserted may be active high or active low depending on the setting in GPIO
configuration register.)
When GPIO16 is configured as an output, setting this bit asserts GPIO16. (Asserted
may be active high or active low depending on setting in GPIO configuration register.)
BAT
IN8
http://onsemi.com
value is above the high limit or below the low limit on the previous
value is above the high limit or below the low limit on the previous
45
Description
MIN
on any channel. This bit is