MC33926PNB Freescale Semiconductor, MC33926PNB Datasheet - Page 14

• Manufacturer Part Number: MC33926PNB
• Description: IC H-BRIDGE THROTTLE CTRL 32-QFN
• Manufacturer: Freescale Semiconductor
• Type: H Bridger

Specifications of MC33926PNB

• Input Type: Non-Inverting
• Number Of Outputs: 2
• On-state Resistance: 120 mOhm
• Current - Output / Channel: 5A
• Current - Peak Output: 11A
• Voltage - Supply: 5 V ~ 28 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 32-QFN
• Product: H-Bridge Drivers
• Rise Time: 3 us
• Fall Time: 3 us
• Supply Voltage (max): 28 V
• Supply Voltage (min): - 0.3 V
• Supply Current: 80 uA
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Bridge Type: H-Bridge
• Maximum Turn-on Delay Time: 5 ms
• Minimum Operating Temperature: - 40 C
• Number Of Drivers: 4
• Output Current: 5 A
• Output Voltage: 7 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

ANALOG CONTROL AND PROTECTION
CIRCUITRY:
logic. The charge pump provides gate drive for the H-Bridge
MOSFETs. The current and temperature sense circuitry
provides detection and protection for the output drivers.
Output under-voltage protection shuts down the MOSFETS.
GATE CONTROL LOGIC:
primarily for any low voltage DC servo motor control
application within the current and voltage limits stated for the
device. Two independent inputs provide polarity control of
14
33926
FUNCTIONAL INTERNAL BLOCK DESCRIPTION
FUNCTIONAL PIN DESCRIPTION
The on-chip voltage regulator supplies 3.3 V to the internal
The 33926 is a monolithic H-Bridge Power IC designed
33926
INTERFACE
MCU
FUNCTIONAL INTERNAL BLOCK DESCRIPTION
ANALOG CONTROL AND PROTECTION
CURRENT SENSE
TEMPERATURE
Figure 10. Functional Internal Block Diagram
COMMAND AND FAULT REGISTERS
SENSE
PROTECTION LOGIC CONTROL
GATE CONTROL LOGIC
PWM CONTROLLER
two half-bridge totem-pole outputs. Two independent disable
inputs are provided to force the H-Bridge outputs to tri-state
(high-impedance off-state).
H-BRIDGE OUTPUT DRIVERS: OUT1 AND OUT2
from OUT1 to OUT2 is reversible and under full control of the
user by way of the Input Control Logic. The output stage is
designed to produce full load control under all system
conditions. All protective and control features are integrated
into the control and protection blocks. The sensors for current
and temperature are integrated directly into the output
MOSFET for maximum accuracy and dependability.
REGULATION
VOLTAGE
CHARGE
The H-Bridge is the power output stage. The current flow
PUMP
Analog Integrated Circuit Device Data
OUTPUT DRIVERS
OUT1 - OUT2
H-BRIDGE
Freescale Semiconductor