ABM4H-A-L Panduit Corp, ABM4H-A-L Datasheet - Page 5
ABM4H-A-L
Manufacturer Part Number
ABM4H-A-L
Description
ADHESIVE BACK MNT
Manufacturer
Panduit Corp
Type
Quad Openingr
Specifications of ABM4H-A-L
Mounting Type
Screw, #6, Adhesive
Color
White
Size / Dimension
2.00" L x 2.00" W x 0.25" H (50.8mm x 50.8mm x 6.4mm)
Body Material
Nylon 6.6
Accessory Type
Cable Tie Mount
Adhesive Backing
RoHS Compliant
Width
2"
Length
2"
Features
4-Way Mount
Mounting Method
Adhesive Backed
Height
0.25 in
For Use With
Panduit Cable Ties
For Use With/related Products
M, I, S, LH, and H Ties
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Mount Spacing
To determine the number of mounts to use in a given application, the following formula can be used as a guideline:
For example, to determine the mount spacing using part number ABM2S-A-C for an application with a bundle of wires that weigh one
pound per foot, the formula would be:
Proper Storage Conditions
Mounts and adhesives should be kept in the original packaging until they are ready to be applied. Store at room temperature 70°F (21°C)
with 45% or less relative humidity. Avoid storing adhesive products near heating vents or other heating sources.
Using the guidelines above, the average shelf life of adhesive foam tape is three (3) years from the date of manufacture. The shelf life of
Two-part Epoxy Adhesive is one (1) year from the date of manufacture. Failing to follow the recommended storage conditions may reduce
the shelf life or adhesive strength of the foam tape and Two-part Epoxy Adhesive.
Adhesive Technical Information
Adhesive foam tape properties are developed with thorough laboratory research and testing. The double-coated adhesive foam tape used
on PANDUIT
performance for use on adhesive mounts. Each package of mounts has an expiration date and a Quality Control number printed on the
label, which permit traceability.
Double Coated Foam Tape Properties
Backing Material
Nominal Backing Density (pcf)
Thickness (PSTC-33)
Static Shear MIL-T-60394A (Hours)
Cable bundle weight in lbs/foot
Maximum static load rating of the mount*
0.5 lbs load rating
* See pages 6-7 for static load ratings.
1 pound per foot
®
Adhesive Backed Mounts is manufactured under strict quality requirements, which provide consistent, high quality
=
2 mounts per foot
72°F/17.6 psi
158°F/2.s psi
72°F/8.8 psi
Less Liner
(In.) Total
=
Minimum number of
mounts per foot
Rubber Adhesive
Polyethylene
1000+
500+
100+
.040
.035
6
Acrylic Adhesive
Polyethylene
200+
.039
.034
N/A
N/A
6
5