DS2438Z Maxim Integrated Products, DS2438Z Datasheet - Page 25
![IC MONITOR SMART BATTERY 8-SOIC](/photos/1/39/13902/8-soic_21-0042b_sml.jpg)
DS2438Z
Manufacturer Part Number
DS2438Z
Description
IC MONITOR SMART BATTERY 8-SOIC
Manufacturer
Maxim Integrated Products
Datasheet
1.DS2438Z.pdf
(29 pages)
Specifications of DS2438Z
Function
Fuel, Gas Gauge/Monitor
Battery Type
Smart Batteries
Voltage - Supply
2.4 V ~ 10 V
Operating Temperature
-40°C ~ 85°C
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.154", 3.90mm Width)
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
DS2438Z
Manufacturer:
Mini-Circuits
Quantity:
1 541
Part Number:
DS2438Z
Manufacturer:
MAXIM/美信
Quantity:
20 000
Company:
Part Number:
DS2438Z+
Manufacturer:
MOT
Quantity:
6 229
Part Number:
DS2438Z+
Manufacturer:
MAXIM/美信
Quantity:
20 000
Company:
Part Number:
DS2438Z+T&R
Manufacturer:
TTI
Quantity:
6 122
Company:
Part Number:
DS2438Z+T&R
Manufacturer:
ON
Quantity:
30 000
Company:
Part Number:
DS2438Z+TR
Manufacturer:
MAXIM
Quantity:
2 600
Part Number:
DS2438Z+TR
Manufacturer:
MAXIM/美信
Quantity:
20 000
INITIALIZATION PROCEDURE “RESET AND PRESENCE PULSES” Figure 9
Write Time Slots
A write time slot is initiated when the host pulls the data line from a high (inactive) logic level to a low
logic level. There are two types of write time slots: Write 1 time slots and Write 0 time slots. All write
time slots must be a minimum of 60 ms in duration with a minimum of a 1 ms recovery time between
individual write cycles.
The DS2438 samples the I/O line in a window of 15 ms to 60 ms after the I/O line falls. If the line is high,
a Write 1 occurs. If the line is low, a Write 0 occurs (See Figure 10).
For the host to generate a Write 1 time slot, the data line must be pulled to a logic low level and then
released, allowing the data line to pull up to a high level within 15 microseconds after the start of the
write time slot. For the host to generate a Write 0 time slot, the data line must be pulled to a logic low
level and remain low for the duration of the write time slot.
Read Time Slots
The host generates read time slots when data is to be read from the DS2438. A read time slot is initiated
when the host pulls the data line from a logic high level to logic low level. The data line must remain at a
low logic level for a minimum of 1 ms; output data from the DS2438 is then valid within the next 14 ms
maximum.
The host therefore must stop driving the I/O pin low in order to read its state 15 ms from the start of the
read slot. (see Figure 10). By the end of the read time slot, the I/O pin will pull back high via the external
pull-up resistor. All read time slots must be a minimum of 60 ms in duration with a minimum of a 1 ms
recovery time between individual read slots.
RESISTOR
MASTER
DS2438
480 ms £ t
480 ms £ t
15 ms £ t
60 ms £ t
25 of 29
PDH
PDL
RSTL
RSTH
< 240 ms
< 60 ms
< ¥ *
< ¥ (includes recovery time)