MAX11080GUU+T Maxim Integrated Products, MAX11080GUU+T Datasheet - Page 27

• Manufacturer Part Number: MAX11080GUU+T
• Description: IC LI/BATTERY MANAGEMENT 38TSSOP
• Manufacturer: Maxim Integrated Products

Specifications of MAX11080GUU+T

• Function: Battery Monitor
• Battery Type: Lithium-Ion (Li-Ion)
• Voltage - Supply: 6 V ~ 72 V
• Operating Temperature: -40°C ~ 105°C
• Mounting Type: Surface Mount
• Package / Case: 38-TSSOP (0.173", 4.40mm Width)
• Product: Charge Management
• Operating Supply Voltage: 6 V to 72 V
• Supply Current: 0.05 uA
• Maximum Operating Temperature: + 105 C
• Minimum Operating Temperature: - 40 C
• Charge Safety Timers: No
• Mounting Style: SMD/SMT
• Temperature Monitoring: No
• Uvlo Start Threshold: 1.6 V
• Uvlo Stop Threshold: 2.8 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Table 4. FMEA Analysis (Note 6) (continued)
Note 6: If the cell voltage is within the monitor range, the heartbeat signal on ALRM
Note 7: The voltage level of high is equal to V
Note 8: Even if the pin has internal pulldown, the pulldown is very weak and the pin should be tied to AGND for logic 0 setting.
Note 9: VDD
NUMBER
PIN
29
30
31
32
33
34
35
36
37
38
and HV - DCIN ≈ -0.4V.
U
TOPSEL
- GND
ALRM
NAME
GND
VDD
TST1
TST2
TST3
N.C.
CP+
CP-
______________________________________________________________________________________
U
U
U
U
= 3.3V and HV - DCIN = 3.6V for the typical configuration. When VDD
Open (or Disconnected) No effect.
Short to Pin 30
Open (or Disconnected) No effect.
Short to Pin 31
Open (or Disconnected)
Short to Pin 32
Open (or Disconnected) No effect.
Short to Pin 33
Open (or Disconnected) No effect.
Short to Pin 34
Open (or Disconnected)
Short to Pin 35
Open (or Disconnected) The ALRM
Short to Pin 36
Open (or Disconnected) ALRM
Short to Pin 37
Open (or Disconnected) ALRM
Short to Pin 38
Open (or Disconnected) ALRM
ACTION
AA
and low is equal to AGND.
No effect.
If pin TOPSEL is set high (V
ALRM
There is no effect if TOPSEL is set low.
If the part is the topmost device in the daisy chain, the ALRM
the state of TOPSEL is low (internally pulled down).
There are no other effects as the state of the pin stays the same (both low).
No effect if TOPSEL is set low.
If TOPSEL is set high, it causes the short between V
is low.
No effect.
No effect.
ALRM
device. Otherwise, the communication of the chain is broken and the alarm
signal from the parts close to the topmost device are not passed through.
Since ALRM
alarm state.
No effect for the topmost device. Otherwise, the communication of the chain is
broken and the alarm signal from the parts close to the topmost are not
passed through. Since ALRM
low for the no-alarm state.
The ALRM
ALRM
(See Note 9.)
ALRM
(See Note 9.)
Battery-Pack Fault Monitors
L
U
L
L
L
L
L
is low.
goes high. HV is approximately 0.4V below DCIN. (See Note 9.)
goes high. VDD
goes high. VDD
goes high. VDD
goes high. VDD
is internally pulled up to VDD
12-Channel, High-Voltage
L
L
goes high.
is high. (See Note 9.)
L
is a reflection of ALRM
U
U
U
U
is approximately 0.5V lower than GND
and HV collapse.
is approximately 0.5V lower than GND
and HV collapse. (See Note 9.)
AA
L
), it causes the short between V
L
is a reflection of ALRM
resumes once the fault condition is removed.
EFFECT
U
U
, the state of ALRM
. There is no effect to the topmost
U
and HV collapse, VDD
AA
U
and AGND and ALRM
, the state of ALRM
L
is high for the no-
L
AA
is set high as
U
U
and AGND.
U
.
.
- GND
U
L
≈ 0V
is
L
27