VIPER53SPTR-E STMicroelectronics, VIPER53SPTR-E Datasheet - Page 8

• Manufacturer Part Number: VIPER53SPTR-E
• Description: IC OFFLINE SWIT PWM CM POWERSO10
• Manufacturer: STMicroelectronics
• Series: VIPER™r

Specifications of VIPER53SPTR-E

• Output Isolation: Isolated
• Frequency Range: 93 ~ 300kHz
• Voltage - Input: 8.4 ~ 19 V
• Voltage - Output: 620V
• Power (watts): 40W
• Operating Temperature: 25°C ~ 125°C
• Package / Case: PowerSO-10 Exposed Bottom Pad
• Power Switch Family: VIPer53SP
• Input Voltage: 0 to 19V
• Power Switch On Resistance: 900mOhm
• Output Current: 1.6A
• Number Of Outputs: Single
• Mounting: Surface Mount
• Supply Current: 9mA
• Package Type: PowerSO
• Operating Temperature (min): -40C
• Operating Temperature (max): 150C
• Operating Temperature Classification: Automotive
• Pin Count: 10
• On Resistance (max): 0.9 Ohms
• Maximum Operating Temperature: + 150 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• For Use With: 497-8435 - BOARD EVAL FOR VIPER53 28W497-6458 - BOARD EVAL BASED ON VIPER53-E497-6262 - BOARD REF SGL VIPER53 90-264VAC497-5866 - EVAL BOARD 24W NEG OUT VIPER53E497-4933 - BOARD PWR SUPPLY 24W OUTPUT VIPE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-6173-2

Pin connections and function
8/36
Table 10.
Pin Name
SOURCE
DRAIN
COMP
TOVL
OSC
V
DD
Pin function
Power supply of the control circuits. Also provides the charging current of the external
capacitor during start-up. The functions of this pin are managed by four threshold
voltages:
- VDDon: Voltage value at which the device starts switching (Typically 11.5 V).
- VDDoff: Voltage value at which the device stops switching (Typically 8.4 V).
- VDDreg: Regulation voltage point when working in primary feedback
(Trimmed to 15 V).
- VDDovp: Triggering voltage of the overvoltage protection (Trimmed to 18 V).
Power MOSFET drain. Also used by the internal high voltage current source during the
start-up phase to charge the external V
Input of the current mode structure, and output of the internal error amplifier. Allows
the setting of thedynamic characteristic of the converter through an external passive
network. The useful voltage range extends from 0.5V to 4.5V. The Power MOSFET is
always off below 0.5V, and the overload protection is triggered if the voltage exceeds
4.35V. This action is delayed by the timing capacitor connected tothe TOVL pin.
Allows the connection of an external capacitor for delaying the overload protection,
which is triggered by a voltage on the COMP pin higher than 4.35V.
Power MOSFET source and circuit ground reference.
Allows the setting of the switching frequency through an external Rt-Ct network.
Pin function
DD
capacitor.
VIPer53 - E