AT17LV020-10JI Atmel, AT17LV020-10JI Datasheet - Page 2

• Manufacturer Part Number: AT17LV020-10JI
• Description: IC SRL CONFIG EEPROM 2M 20-PLCC
• Manufacturer: Atmel

Specifications of AT17LV020-10JI

• Programmable Type: Serial EEPROM
• Memory Size: 2Mb
• Voltage - Supply: 3 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-LCC (J-Lead)
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: AT17LV02010JI

Block Diagram
FPGA Master Serial
Mode Summary
Controlling the High-
density AT17 Series
Serial EEPROMs
During Configuration
2
AT17C/LV020
The I/O and logic functions of the FPGA and their associated interconnections are
established by a configuration program. The program is loaded either automatically
upon power-up, or on command, depending on the state of the FPGA mode pins. In
Master Mode, the FPGA automatically loads the configuration program from an external
memory. The AT17 Serial Configuration EEPROM has been designed for compatibility
with the Master Serial Mode.
This document discusses the AT40K FPGA interface. For more details or AT6K FPGA
applications, please reference “AT40K Series Configuration” or “AT6000 Series Config-
uration” application notes.
Most connections between the FPGA device and the AT17 Serial EEPROM are simple
and self-explanatory:
•
•
•
•
The READY pin is available as an open-collector indicator of the device’s RESET sta-
tus; it is driven Low while the device is in its POWER-ON RESET cycle and released
(tri-stated) when the cycle is complete.
There are two different ways to use the inputs CE and OE.
The DATA output of the AT17 Series Configurator drives DIN of the FPGA devices.
The master FPGA CCLK output drives the CLK input of the AT17 Series
Configurator.
The CEO output of any AT17C/LV020 drives the CE input of the next AT17C/LV020
in a cascade chain of EEPROMs.
SER_EN must be connected to VCC, (except during ISP).
CEO (A2)