AT17LV010-10PU Atmel, AT17LV010-10PU Datasheet - Page 26

• Manufacturer Part Number: AT17LV010-10PU
• Description: IC SRL CONFIG EEPROM 1M 8-DIP
• Manufacturer: Atmel

Specifications of AT17LV010-10PU

• Programmable Type: Serial EEPROM
• Memory Size: 1Mb
• Voltage - Supply: 3 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-DIP (0.300", 7.62mm)
• Package: 8PDIP
• Interface Type: Serial-2Wire
• Density: 1 Mb
• Maximum Operating Frequency: 10|15 MHz
• Typical Operating Supply Voltage: 3.3|5 V
• Organization: 1Mx1
• Data Retention: 90 Year
• Maximum Clock Frequency: 15 MHz
• Supply Voltage (max): 3.6 V, 5.5 V
• Supply Voltage (min): 3 V, 4.5 V
• Maximum Operating Current: 10 mA
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 3.3 V, 5 V
• Current, Input, Leakage: ±10 μA
• Current, Operating: 5 mA
• Current, Output, Leakage: ±10
• Interface: 2-Wire
• Memory Type: Serial EEPROM
• Package Type: PDIP
• Temperature, Operating: -40 to +85 °C
• Time, Address Setup: 25
• Time, Fall: 20 ns
• Time, Rise: 20 ns
• Voltage, Esd: 2000 V
• Voltage, Input, High: 5.5 V
• Voltage, Input, Low: 0.8 V
• Voltage, Output, High: 3.76 V
• Voltage, Output, Low: 0.37 V
• Voltage, Supply: 4.5 to 5.5 V
• For Use With: ATDH2225 - CABLE ISP FOR AT17ATDH2200E - CONFIGURATOR PROGRAM BOARD KIT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Headquarters
Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131
USA
Tel: [phone]
Fax: [phone]
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any
intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDI-
TIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY
WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDEN-
TAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF
THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no
representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications
and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided
otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use
as components in applications intended to support or sustain life.
© 2008 Atmel Corporation. All rights reserved. Atmel
Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.
International
Atmel Asia
Room 1219
Chinachem Golden Plaza
77 Mody Road Tsimshatsui
East Kowloon
Hong Kong
Tel: [phone]
Fax: [phone]
Product Contact
Web Site
www.atmel.com
Literature Requests
www.atmel.com/literature
®
, logo and combinations thereof, and others are registered trademarks or trademarks of
Atmel Europe
Le Krebs
8, Rue Jean-Pierre Timbaud
BP 309
78054 Saint-Quentin-en-
Yvelines Cedex
France
Tel: [phone]
Fax: [phone]
Technical Support
[e-mail]
Atmel Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel: [phone]
Fax: [phone]
Sales Contact
www.atmel.com/contacts
2321I–CNFG–2/08