AT17LV65-10JI Atmel, AT17LV65-10JI Datasheet - Page 9

• Manufacturer Part Number: AT17LV65-10JI
• Description: IC SRL CONFIG EEPROM 64K 20-PLCC
• Manufacturer: Atmel

Specifications of AT17LV65-10JI

• Programmable Type: Serial EEPROM
• Memory Size: 64kb
• Voltage - Supply: 3 V ~ 3.6 V, 4.5 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-LCC (J-Lead)
• For Use With: ATDH2225 - CABLE ISP FOR AT17ATDH2200E - CONFIGURATOR PROGRAM BOARD KIT
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: AT17LV6510JI

7. Cascading Serial Configuration EEPROMs
8. AT17LV Series Reset Polarity
9. Programming Mode
10. Standby Mode
2321I–CNFG–2/08
For multiple FPGAs configured as a daisy-chain, or for FPGAs requiring larger configuration
memories, cascaded configurators provide additional memory.
After the last bit from the first configurator is read, the clock signal to the configurator asserts its
CEO output Low and disables its DATA line driver. The second configurator recognizes the Low
level on its CE input and enables its DATA output.
After configuration is complete, the address counters of all cascaded configurators are reset if
the RESET/OE on each configurator is driven to its active (Low) level.
If the address counters are not to be reset upon completion, then the RESET/OE input can be
tied to its inactive (High) level.
The AT17LV65 devices do not have the CEO feature to perform cascaded configurations.
The AT17LV series configurator allows the user to program the reset polarity as either
RESET/OE or RESET/OE. This feature is supported by industry-standard programmer
algorithms.
The programming mode is entered by bringing SER_EN Low. In this mode the chip can be pro-
grammed by the Two-Wire serial bus. The programming is done at V
Programming super voltages are generated inside the chip.
The AT17LV series configurators enter a low-power standby mode whenever CE is asserted
High. In this mode, the AT17LV65/128/256 configurator consumes less than 50 µA of current at
3.3V (100 µA for the AT17LV512/010 and 200 µA for the AT17LV002/040). The output remains
in a high-impedance state regardless of the state of the OE input.
AT17LV65/128/256/512/010/002/040
CC
supply only.
9