TC58V64BFT(F) Toshiba, TC58V64BFT(F) Datasheet - Page 30

• Manufacturer Part Number: TC58V64BFT(F)
• Description: IC FLASH 64MBIT 50NS 44TSOP
• Manufacturer: Toshiba

Specifications of TC58V64BFT(F)

• Format - Memory: FLASH
• Memory Type: FLASH - Nand
• Memory Size: 64M (8M x 8)
• Speed: 50ns
• Interface: Serial
• Voltage - Supply: 2.7 V ~ 3.6 V
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 44-TSOP II
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: TC58V64BFT

(11)
(12)
RY
/
WE
RE
I/O
BY
Several programming cycles on the same page (Partial Page Program)
Note regarding the RE signal
Therefore, once the device has been set to Read mode by a “00H”, “01H” or “50H” command, the internal
column address counter is incremented by the RE clock independently of the address input timing, If the
internal read operation (array to register) will occur and the device will enter Busy state. (Refer to Figure 25.)
RE clock input pulses start before the address input, and the pointer reaches the last column address, an
2nd programming
5th programming
1st programming
A page can be divided into up to 5 segments. Each segment can be programmed individually as follows:
Hence the RE clock input must start after the address input.
RE The internal column address counter is incremented synchronously with the RE clock in Read mode.
00H/01H/50H
Result
Note: The input data for unprogrammed or previously programmed page segments must be “1”
(i.e. the inputs for all page bytes outside the segment which is to be programmed should be set to all “1”).
Data Pattern 1
Data Pattern 1
All 1s
Data Pattern 2
Data Pattern 2
All 1s
Figure 24.
Figure 25.
All 1s
Address input
All 1s
Data Pattern 5
Data Pattern 5
2001-10-24 30/33
TC58V64BFT