AT34C02-10TI Atmel, AT34C02-10TI Datasheet - Page 12
![IC EEPROM 2KBIT 400KHZ 8TSSOP](/photos/6/83/68331/453-8-tssop_sml.jpg)
AT34C02-10TI
Manufacturer Part Number
AT34C02-10TI
Description
IC EEPROM 2KBIT 400KHZ 8TSSOP
Manufacturer
Atmel
Datasheet
1.AT34C02-10PC.pdf
(21 pages)
Specifications of AT34C02-10TI
Format - Memory
EEPROMs - Serial
Memory Type
EEPROM
Memory Size
2K (256 x 8)
Speed
400kHz
Interface
I²C, 2-Wire Serial
Voltage - Supply
4.5 V ~ 5.5 V
Operating Temperature
-40°C ~ 85°C
Package / Case
8-TSSOP
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
AT34C02-10TI-2.7
Manufacturer:
ATMEL/爱特梅尔
Quantity:
20 000
Company:
Part Number:
AT34C02-10TI1.8
Manufacturer:
ATMEL
Quantity:
6 000
in and acknowledged by the EEPROM, the microcontroller must generate another start
condition. The microcontroller now initiates a current address read by sending a device
address with the read/write select bit high. The EEPROM acknowledges the device
address and serially clocks out the data word. To end the command, the microcontroller
does not respond with a zero but does generate a following stop condition (see Figure
12 on page 13).
SEQUENTIAL READ: Sequential reads are initiated by either a current address read or
a random address read. After the microcontroller receives a data word, it responds with
an acknowledge. As long as the EEPROM receives an acknowledge, it will continue to
increment the data word address and serially clock out sequential data words. When the
memory address limit is reached, the data word address will “roll over” and the sequen-
tial read will continue. The sequential read operation is terminated when the
microcontroller does not respond with a zero but does generate a following stop condi-
tion (see Figure 13 on page 13).
WRITE PROTECT REGISTER STATUS: To find out if the register has been pro-
grammed, the same procedure is used as to program the register except that the R/W
bit is set to 1. If the device acknowledges, then the write protect register has not been
programmed. Otherwise, it has been programmed and the device is permanently write
protected at the first half of the array.
Figure 8. Device Address
Figure 9. Byte Write
AT34C02
12
0958Q–SEEPR–1/07