SJ-3551 1" 3M, SJ-3551 1" Datasheet - Page 4

• Manufacturer Part Number: SJ-3551 1"
• Description: DUAL LOCK PRESS 1"X50YD BLK 400
• Manufacturer: 3M
• Series: Dual Lock™r

Specifications of SJ-3551 1"

• Wire/cable Tie Type: Interlocking Stems
• Bundle Diameter: Variable
• Length: 150' (45.7m)
• Width: 1.000" (25.40mm)
• Mounting Type: Adhesive
• Color: Black
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Tensile Strength: -
• Other names: 2120086278; 21200862786; 70-0704-2834-0; 70070428340; SJ-3551 1"; SJ3551 (1"); SJ355110; SJ355110-50; SJ355110

Dual Lock
SJ3551 (Type 400) • SJ3552 (Type 170) • SJ3550 (Type 250)
Available Sizes
Attachment
Techniques
TM
a) All of the 3M™ Dual Lock™ Reclosable Fastener SJ3551, SJ3552 and SJ3550 products are supplied on 3" core with the
b) V is the identical SJ product construction except the product is vacuumed to remove debris and packaged in a plastic
c) FS is the identical SJ product construction, except the liner and product are each spliced to provide a continuous product.
d) SM is the identical SJ product construction except the Dual Lock reclosable fastener is spliced with a colored 3M™
e) It is not recommended to engage Dual Lock reclosable fastener type 250 to type 250 (Dual Lock reclosable fastener
f) Reclosable fasteners can be fabricated in many custom shapes and sizes to fit your product design and manufacturing
The following information is intended to assist the customer in selecting and using an
appropriate attachment option for their application. Final product performance depends upon a
number of factors, the substrate and its surface characteristics, including the fastener selected,
the method in which the fastener is applied, the time and environmental conditions in which it is
expected to perform. Because many of these factors are uniquely within the user’s knowledge
and control, it is required that the user evaluate the 3M product to determine whether it is fit for
a particular purpose and suitable for the user’s method of application and desired end use.
Design Considerations: As a general rule, four square inches of fastener area per pound of
static tensile or shear load to be supported is suggested as a starting point for evaluation. More
or less area may be needed depending on specific conditions or end use applications. Type 250
Dual Lock reclosable fastener less than 0.75" (19 mm) width should not be engaged to other
type 250 Dual Lock reclosable fastener as low disengagement values may occur.
Rounding the corners, recessing the product into the substrate and providing raised edges
around the Dual Lock reclosable fastener can reduce the possibility of edge lifting or catching
that may cause the fastener to be torn from the substrate, while improving the overall
appearance of the fastener on the finished product. Mechanically securing the corners of the
Dual Lock reclosable fastener can also reduce the possibility of edge lifting, but may reduce
the closure performance.
It is recommended that pieces of Dual Lock reclosable fastener be engaged to pieces or strips
of Dual Lock reclosable fastener. Strips of Dual Lock reclosable fastener should not be
engaged to strips of Dual Lock reclosable fastener as low disengagement may occur from
incomplete engagement along the full strip. Pieces or strips of Dual Lock reclosable fastener
can be engaged to pieces or strips of Scotchmate reclosable fastener loop.
Standard Widths
Fabricated Forms
± 1/16" (1.6 mm)
1
1
1/2" (12.7 mm)
liner to the edge of the adhesive. There are no extended liners or selvedge edge with any of the standard products listed
above.
bag to reduce particle contamination. Useful for cleanroom applications.
Scotchmate™ Reclosable Fastener loop, providing a strong splice for pulling through automated converting equipment.
SJ3550 to SJ3550 for widths of 0.75" or narrower.
process. Contact your local 3M authorized distributor, converter or 3M representative for additional options,
configurations and ordering information.
4" (101.6 mm)
6" (152.4 mm)
3/4" (19 mm)
1" (25.4 mm)
2" (50.8 mm)
3" (76.2 mm)
Reclosable Fasteners
3
1
/
/
8
2
" (31.8 mm)
" (38.1 mm)
(a)
(f)
Yards (Meters)
Roll Length
50 (45.7)
50 (45.7)
50 (45.7)
50 (45.7)
50 (45.7)
50 (45.7)
50 (45.7)
50 (45.7)
50 (45.7)
SJ3551 SJ3551V
–
- 4 -
–
–
–
–
–
–
–
–
3M™ Dual Lock™ Reclosable Fasteners
(b)
SJ3552 SJ3552V SJ3550 SJ3550FS
–
Cut Pieces
–
–
–
–
(e)
(e)
–
–
–
–
–
–
–
(c)
SJ3550SM
–
–
–
–
–
–
–
–
(d)