PLT.7M-C Panduit Corp, PLT.7M-C Datasheet - Page 67

• Manufacturer Part Number: PLT.7M-C
• Description: TIE CABLE PAN-TY 18LB 3.1"
• Manufacturer: Panduit Corp
• Series: PAN-TY®r
• Type: Pan-Tyr

Specifications of PLT.7M-C

• Wire/cable Tie Type: Standard, Locking
• Bundle Diameter: 0.68" (17.27mm)
• Length: 0.258' (78.74mm, 3.10")
• Width: 0.090" (2.30mm)
• Mounting Type: Free Hanging (In-Line)
• Tensile Strength: 18 lbs. (8.2 kg)
• Color: Natural
• Cable Tie Length: 3.1"
• Cable Tie Width: 0.09"
• Body Material: Nylon 6.6
• Tensile Strength Pounds: 18lb
• Cable Bundle Diameter Min: 0.8mm
• Cable Bundle Diameter Max: 0.68"
• Maximum Bundle Diameter: 0.68 in
• Product: Cable Ties
• Application: For indoor use
• Height: 0.115" (Head)
• Protection Class: Tie, Cable
• Special Features: Locking
• Operating Temp Range: -40C to 85C
• Product Length (mm): 79mm
• Product Depth (mm): 4.6mm
• Product Height (mm): 2.9mm
• Accessory Type: Locking Cable Tie
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 298-1018

ASTM D 635
• Burning Rate
• If two or more specimens have burned to the 100mm mark then Average Burning Rate (cm/min.) shall be reported
• Average Time of Burning and Average Extent of Burning
• Average time of burning and average extent of burning of the sample shall be reported if none of ten samples or
• Average Time of Burning (ATB):
*HALAR is a registered trademark of Solvay Solexis, Inc.
**TEFZEL is a registered trademark of E. I. DuPont de Nemours Co.
Rating based on 1/8" thick test samples
Samples of a material, with dimensions 125mm by 12.5mm and the thickness of the intended end use
product, are tested in an unaged “as manufactured” state. A precisely controlled flame is applied to the
specimen and a stopwatch is started. The flame is applied for 30 seconds. The stopwatch is stopped
when burning or glowing combustion ceases or when the flame has proceeded to a mark 100mm from
the free end. Ten specimens are tested.
as the average of the burning rates of all specimens which have burned to the 100mm mark
no more than one of twenty specimens have burned to the 100mm mark
Weather Resistant ACETAL (DT Series)
Stainless (MLT prefix)
Rounded to the nearest 5 sec.
Materials
Natural Nylon 6.6
Weather Resistant Nylon 6.6 (-00)
Weather Resistant Nylon 6.6 (-0)
Heat Stabilized Nylon 6.6 (-30)
Heat Stabilized Natural Nylon 6.6 (-39)
Heat Stabilized Weather Resistant Nylon 6.6 (-300)
Flame Retardant Black Nylon 6.6 (-60)
Flame Retardant Nylon 6.6 (-69)
Weather Resistant Nylon 12 (-120)
Natural Polypropylene (-109)
Weather Resistant Polypropylene (-100)
TEFZEL** (-76)
HALAR* (-702)
ATB,s =
Number of Specimens
∑
Flammability
10
0
(
t 30s
–
)
Flammability Ratings
Not Recognized
Not Recognized
94 HB (.94mm)
94 HB (1.5mm)
Not Applicable
94V-2 (1/16")
94V-2 (1/16")
94V-2 (1/16")
94V-2 (1/16")
94V-2 (1/16")
94V-2 (1/16")
94V-0 (1/64")
94V-0 (1/64")
94V-0(1/16")
94V-0(1/16")
• Average Extent of Burning (AEB):
Rounded to the nearest 5mm
UL94
AEB,mm
=
∑
Number of Specimens
10
0
kjf dsjfs
Most commonly used parts appear in BOLD.
(100 – unburned length)
Ave. Burning Rate
Ave. Burning Rate
Ave. Burning Rate
Ave. Burning Rate
ATB < 5 seconds*
ATB = 5 seconds
ATB = 5 seconds
ATB = 5 seconds
ATB = 5 seconds
ATB = 5 seconds
ATB = 5 seconds
ATB < 5 seconds
ATB < 5 seconds
ATB < 5 seconds
AEB = 15 min.
Not Applicable
AEB = 20mm
AEB = 20mm
AEB = 20mm
AEB = 20mm
AEB = 20mm
AEB = 20mm
AEB = 15mm
AEB < 15mm
AEB =15mm
ASTM D635
2.8 cm/min.
1.6cm/min.
2 cm/min.
2 cm/min.
67