DS2780K Maxim Integrated, DS2780K Datasheet - Page 4

• Manufacturer Part Number: DS2780K
• Description: Power Management IC Development Tools
• Manufacturer: Maxim Integrated
• Series: DS2780r

DS2780EVKIT+
REGISTERS MENU
The Registers Menu gives immediate access to all four status and function registers of the DS2780.
Selecting any of the registers will open an individual control window giving the user a description of each
register bit and the ability to read or write it. See the status register window example.
STATUS REGISTER
The present state of all register bits are displayed immediately upon opening the register window. R/W
locations contain a selection field or command button to allow the user to determine their state. Pressing
the WRITE button will write the new value to the register and read the corresponding register inside the
DS2780 to verify the correct value was written. The Control Register is stored in EEPROM, so when the
WRITE command is issued, the value is written and copied to EEPROM without changing the values of
the remainder of the Parameter EEPROM block.
1 WIRE SPEED MENU
The 1 Wire Speed Menu allows the user to select the appropriate 1 Wire timing. The speed the device
uses is determined by the state of the OVD pin (pin 6).
4 of 13